Panasonic AG-AF100A Manual page 8

sTep #3 – imporT Clips.
iMovie will automatically sense the camera and open up an import video window with thumbnails of all your clips.
You can look at any clip in the viewer window and you can choose to import all clips, by clicking import all.
Alternatively, if you want to import only selected clips, move the slider on the bottom left to Manual. Now you can check
the clips you want and then click on "Import Checked."
sTep #4 – DeCiDe where To sTore your Clips anD aT whaT size.
A pop up window will appear and you should choose the hard drive where you want to store your video.
sTep #5 - CliCk ok.
This is the step where iMovie will transcode AVCHD to the Apple Intermediate Codec. Depending on your clips, it may
take minutes or more than an hour for iMovie to import and create thumbnail images of the clips. When the import is
complete you will see a message similar to this.
Here you can also choose how you want to organize
your imported video in the Event Library. And finally
you will need to choose the size you wish to import.
Either Full – 1920x1080 or Large – 960x540.
Since your Panasonic AVCHD camera records in full
1920x1080, you should select Full.
8