JVC GY-HM600U Instruction Manual page 115

T Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value will always be displayed. (0 to 99)
0
Memo :
You can specify the display method (Number/
0
Bar) or turn off the display in [Main Menu] B
[LCD/VF] menu B [Display Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
(A P99 [ Zoom ] )
Displayed in the Display 0 screen only when
0
there is a change.
U Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F E E D D 2 0
.
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] menu B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
(A P100 [ TC/UB ] )
V Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
(A P64 [Synchronizing Time Code on Another
Camera] )
W Event/Warning Display Area
Displays error messages.
(A P128 [Error Messages and Actions] )
X Media Status
---- : No card found in the selected
slot
STBY : Recording standby
: Recording
RREC
REVIEW : Clip Review
(A P68 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P : Pre Rec recording standby
(A P73 [Pre Rec] )
: Pre Rec recording
RRECP
(A P73 [Pre Rec] )
STBY C : Clip Continuous Rec recording
standby
(A P73 [Clip Continuous Rec] )
: Clip Continuous Rec recording
RRECC
(A P73 [Clip Continuous Rec] )
STBYC : Clip Continuous Rec recording
pause
(displayed in
yellow)
(A P73 [Clip Continuous Rec] )
STBY N : Interval Rec recording standby
(A P76 [Interval Rec] )
STBYN : Interval recording pause
(displayed in
red)
: Interval Rec recording
RRECN
(A P76 [Interval Rec] )
STBY M : Frame Rec recording standby
(A P75 [Frame Rec] )
: Frame Rec recording
RRECM
(A P75 [Frame Rec] )
STBYM : Frame Rec recording pause
(displayed in
yellow)
(A P75 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
Y Dual Rec/Backup Rec Display
"DUAL" is displayed in the Dual Rec mode and
"BACKUP" is displayed in the Backup Rec
mode.
(A P107 [ Slot Mode ] )
Memo :
This item is not displayed when [Slot Mode] is
0
set to "Series".
Displayed in the Display 0 and Display 1 screens
0
during warnings only. (When the remaining time
is shorter than 3 minutes)
115