Message Indicators; Troubleshooting Guide - GE 295861 User Manual

Message Indicators

The following special messages indicate the status of a message or the unit:
00 CALLS
UNKNOWN CALLER The incoming call does not have Caller ID service or their
BLOCKED CALL
ERROR
START/END
MEMO

Troubleshooting Guide

Telephone Solutions
No dial tone
• Check the hook switch to make sure it pops up.
Won't dial out
• Make sure the tone/pulse setting is programmed correctly.
Phone doesn't ring
• Check the ringer volume.
• Could have too many phones on one line.
(See FCC registration information regarding REN)
Low handset or speaker volume
• Check the volume settings.
The call record log is empty.
service area is not linked to yours. If UNKNOWN NAME
appears along with a calling number, the name information for
that number was not available.
The caller is registered as "Private Number" and the Caller ID
information is withheld.
Caller information has been interrupted during transmission.
Indicates you are at the beginning or the end of the call record
log.
The message has been recorded as a memo.