Bluetooth - Samsung SPH-L710 User Manual

Set Up Sprint Hotspot
1. Press and tap
2. Tap the ON/OFF slider next to Sprint hotspot to toggle Sprint hotspot ON and activate
the service.

When active, the Notifications area of the status bar shows Hotspot activated.
Note: Connect your charger to your phone if you plan to use Sprint Hotspot for an extended
period.
Important! Upon activation, any current Wi-Fi connection to an access point is terminated.
Connect to Sprint Hotspot
1. Enable Wi-Fi on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the phone and select your hotspot from the network list.

The network name for Sprint Hotspot on your phone will be in the form of SPH-
L710XXX. ("XXX" represents a three-digit number unique to your phone.)You can
change the name by tapping Sprint Hotspot settings from the Sprint Hotspot
screen.
3. Select this phone and follow your onscreen instructions to enter the passkey (provided
on the Sprint Hotspot page).
4. Launch your Web browser to confirm you have an Internet connection.
Adjust Your Sprint Hotspot Settings
1. Press and tap
2. Configure the Network (SSID), device visibility (Hide my device), Security [Open, WPA
PSK, or WPA2 PSK], Password, password visibility (Show password), and advanced
options.
3. Tap Save to store the new hotspot settings.

Bluetooth

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth phones, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless phones. The Bluetooth communication range is
usually approximately 30 feet.
Web and Data
> Sprint hotspot.
> Sprint hotspot > Configure.
127