Switching The Appliance On; Setting The Temperature; Alarm Function - Bosch GID18A50GB Instructions For Use Manual

en
Switching
the appliance on
Fig. 2
Press the On/Off button 2, the button is
lit. The temperature alarm is switched off
by pressing the alarm button 4.
The alarm display 5 lights up until
the appliance has reached the set
temperatures.
We recommend the medium setting.
Operating tips
The sides of the housing are
■
sometimes heated slightly.
This prevents condensation in
the area of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
The refrigeration system may cause
■
several areas of the freezer shelves to
frost quickly. This does not affect
function or power consumption.
The appliance does not require
defrosting until the entire surface
of the freezer shelf is covered with
more than 5 mm of frost or ice.
Setting
the temperature
Fig. 2
Set the temperature controller 1 to
a number with a coin. The higher
the number, the lower the temperature.
8

Alarm function

Temperature alarm
The temperature alarm switches on
if the freezer compartment is too warm
and the frozen food is at risk of thawing.
The alarm may switch on without any
risk to the frozen food:
when the appliance is switched on,
■
when large quantities of fresh food are
■
placed in the appliance,
if the freezer compartment door is
■
open too long.
Note
Do not refreeze thawing or thawed food.
Only ready meals (boiled or fried) may
be refrozen.
No longer store the frozen produce for
the max. storage period.
Alarm display
Fig. 2
The alarm display 5 lights up if
the freezer compartment becomes too
warm. Frozen food is at risk of thawing.
Switching off the alarm
Fig. 2
Press the alarm button 4 to switch off
the warning signal.