Powering Up The Server; Powering Up The Rack Server - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Installing the Rack Server

Powering Up the Server

Power up the server after the peripheral and power cords are connected to the server.
WARNING: To reduce the risk of electrical shock or damage to the equipment:
•
•
•
•
To power up the server:
1. Press the Power On/Standby button to power up the server.
Figure 5-20: Powering up the rack server
2. Observe the front panel LEDs to be sure that the server has a successful
power-on sequence.
5-26
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
Unplug the power cord from each power supply to disconnect power to the
equipment.
Do not route the power cord where it can be walked on or pinched by items
placed against it. Pay particular attention to the plug, electrical outlet, and
the point where the cord exits from the server.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide