Configuring Audio For Media Center; Configuring Audio For Windvd Player - HP Media Center m7100 - Desktop PC Getting Started Manual

48
HP Media Center PC Getting Started Guide

Configuring Audio for Media Center

Follow these steps after you have installed,
connected, and configured your speakers.
To configure multichannel audio output for the
Media Center:
1
Click Start on the taskbar, scroll down, and
select Media Center.
2
Click Settings, click DVD. Scroll down and
click Audio.
3
Select Speaker Configuration.

Configuring Audio for WinDVD Player

Follow these steps after you have installed,
connected, and configured your speakers.
The InterVideo WinDVD program (select models
only) is set up for two-speaker (stereo) output. To
hear all speakers from DVD movies recorded with
multichannel audio, change the audio properties
for WinDVD to match your speaker configuration
(if your InterVideo WinDVD program supports
more than two channels).
If you want to play a stereo DVD, you may change
the audio properties of WinDVD to match the
recorded DVD audio output.
1
Insert a DVD
Or
Click Start, choose All Programs,
InterVideo WinDVD, InterVideo
WinDVD Player, and then click
InterVideo WinDVD. The WinDVD video
window opens.
2
Right-click anywhere in the WinDVD video
window, and then click Setup. The Setup
window opens.
4
Select your Speaker Configuratiuon by
clicking on the (+) or ( – ). If you select
Analog - 2 Channel, then select the channel
mode by clicking the (+) or ( – ).
5
Click Save.
6
Close the window.
3
Click the Audio tab.
4
Select Audio Output Configuration.
Choose Analog or Digital (S/PDIF).
Click Apply.
5
Select Audio Speaker Configuration.
Click the option for the number of speakers to
match your multichannel speaker system.
6
You can click the Test button to test the
speakers. You should be able to hear the
speakers. Click Stop, and then click OK.