7. Swing the display assembly into a partially closed position.
8. Position the computer with the rear panel toward you.
CAUTION: Support the display assembly when removing the following
Ä
screws. Failure to support the display assembly can result in damage to
the display assembly and other computer components.
9. Remove the six Torx8 T8M2.5×9.0 screws 1 that secure the
display assembly to the computer.
10. Lift the display assembly 2 straight up and remove it.
Removing the Display Assembly
Reverse the above procedure to reassemble and install the
display assembly
Maintenance and Service Guide
Removal and Replacement Procedures
5–45