Operating Instructions (For Function Parameters) Digital Color Imaging Systems DP-C354 / C264 Model No. DP-C323 / C263 / C213 Model No. Before operating this machine, please carefully read this manual, and keep this documentation in a safe place for future reference. English (Illustration shows optional accessories that may not be installed on your machine.)
Page 2
Operating Instructions The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals for future reference. If you lose the manual, contact the authorized Panasonic dealer. Operating Instructions (For Setting Up) This manual contains essential information for setting up the machine.
Page 3
Conventions Icons The following icons are used in this manual. Icon Description Indicates important information that must be read in detail. Indicates reference Information. Notation The following notations are used in this manual. Notation Description For Keys and Buttons Hard buttons on the Control Panel are depicted as **** key, soft buttons on the Touch Panel are depicted as “xxx”.
Table of Contents Chapter 1 Before Starting Function Setup Outline ......................Function Setup Menu Configuration................Using the Keyboard ......................Basic Operations for Function Setup................... Chapter 2 General Settings General Settings........................General User........................10 Key Operator........................11 Example : Dept. Counter Mode ................... Example : Departmental Counter ..................
Page 5
Example : Receive to Memory..................... 68 Example : Password-Transmit / Password-Receive............70 Example : Select Receive....................72 Example : Initial Sending Station (LAN Relay) ..............74 LAN RLY XMT Request (Fax parameter 140)..............74 Example : Relay Station (LAN Relay).................. 76 Relay XMT (Fax parameter 142) ..................
• The Key Operator Password is required before any changes can be made in the Key Operator Mode. For security, the Key Operator is advised to setup, and manage the 8-digit password. To set the password, consult with the authorized Panasonic dealer. (Default password is 00000000) Function Setting...
Using the Keyboard Entering Uppercase / Lowercase Letters Entering Numeric Characters, and Symbols Select “Caps” to change the Select “Numeric/Symbols” to input characters between uppercase / lowercase. the numbers / symbols. Ex: When setting “15 LDAP Server Name” in Ex: When setting “15 LDAP Server Name” in Fax/Email Settings (see pages 44, 62, and Fax/Email Settings (see pages 44, 62, and 63).
Basic Operations for Function Setup The following procedure is an example of setting up the function(s). To select a function, refer to the list of Function Parameters described later. Press the Function key. Change the settings using the following operations. Select the desired setting.
Page 9
Entering numbers using Select “Close”. Select , and then select “OK”. Ex: When setting “40 Fold Position(A3/ LDR)” in General Settings (see page 16). After setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode.
Departmental Set whether to display departmental Consult with the authorized Counter counters, limit counters, and total counters. Panasonic dealer on how to use this item. 5 - 9 Manual STR Set whether to clean the transfer roller Off, On Cleaning manually.
B5 , B5 , A5 To change the preset paper size used in 8x13 , 8.5x13 the Paper Tray, consult with the authorized Panasonic dealer. Select the paper type. “Change Type” Plain, Glossy, Recycled A4R/A5 Size Set the smallest paper size that will be fed...
Page 12
Key Operator Parameter Comments Selective Item Standard Setting 0 - 19 Network Settings The setting items increment automatically to the next parameter setting when the “OK” button is pressed. General DHCP Default, TCP/IP Address, TCP/IP Subnet Mask, TCP/IP Default Gateway, DNS Server Address, Community Name (1), Community Name (2), WINS Server 1 IP, WINS Server 2 IP, Scope ID, IP Filter, IP...
Page 13
Key Operator Parameter Comments Selective Item Standard Setting 0 - 19 Special Paper Set the paper tray which will not be used as None, Tray 1, None Tray 1 the automatic document feeder tray. Tray 2, Tray 3, Tray 4, Bypass Special Paper None...
Page 14
When “18 Panel Beep Sound” is set to “Off”, the machine makes no sound. Dept. Counter Set whether to display departmental Consult with the authorized Panasonic Mode dealer on how to use this item. counters, limit counters, and total counters.
Page 15
Key Operator Parameter Comments Selective Item Standard Setting 20 - 39 MAC Address Display the MAC address (Ethernet address). The MAC address is displayed only, but cannot be set. Routing Menu Set whether to use the Routing function. No, Yes Function When the optional software (Document Distribution System) is installed.
Page 16
Key Operator Parameter Comments Selective Item Standard Setting 20 - 39 Auto Reset Set whether to display the auto reset guide. No, Yes Information Pap. Tray Priority Set the paper tray priority for Black and S>C>B, C>S>B C>S>B (B/W) White copy or print job. S: Optional paper feed unit C: Paper tray of the main unit B: Sheet bypass...
Page 17
SysContact Set the system management name. Up to 31 characters SysName Set the system name. Up to 31 characters Panasonic DP-XXXX SysLocation Set the system installation location. Up to 31 characters Set whether to use the machine on the Off, On Microsoft Network (SMB).
Page 18
) is installed. There is no default value. When the machine starts up, and parameter “64 Bonjour” is set to “On”, then, “Panasonic DP-XXXX and the lower six figures of MAC Address” will be automatically setup. Bonjour Name Set the name of Bonjour.
Page 19
Key Operator Parameter Comments Selective Item Standard Setting 60 - 79 Auto Tone Adjust If the colored image tone has deviated, set Stop, Start Stop the automatic tone adjustment. <Procedure> 1. Execute this mode to print the calibration sheet. 2. Place the calibration sheet on the platen, and execute this mode again.
To use the Dept. Counter Mode, a special service setting is required. Contact your authorized Panasonic dealer. When the departmental counter function is enabled, the password (department code) entry screen appears on the touch panel display.
Page 21
For the subsequent steps, refer to the relevant Enter the password (8-digit), and then section. press “OK”. Registering/Changing the Password (Department Code) You can register/change the password (department code) of each department. Refer to Registering/Changing the Password (Department Code) (see page 22).
Page 22
Registering/Changing the Password (Department Code) Select “Identification Code”. Enter the department name (up to 25 characters), and then select “OK”. Select the department number subject to password (department code) registration/change, and then press “Input”. Select “OK”. Select “Close”. Enter the department code (up to 8- digit), and then select “OK”.
Page 23
Clearing the Total Counter If the total counter is not displayed, Select “Close”. select “Total Counter”. Select “Clear”. After setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode. Select “Yes”...
Page 24
Printing a Departmental List or Report Changing the Departmental Counter Select “Print List”. Select “Departmental Counter”. Select the list or report you want to Select the department number subject print, and then select “OK”. to departmental count change, and then select “Input”. Printing of the selected list or report starts.
Page 25
Select “Input”, input a count (up to 7 Select “Close”. digits) from the keypad, and then select “OK”. After setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode. Select “Close”.
Page 26
Changing the Maximum Prints If you input “9999999”, the copy count limit Select “Maximum Prints”. becomes infinite. If the set limit is exceeded, the machine stops automatically. Select “Close”. Select the department number subject to departmental limit change, and then select “Input”.
Example : Departmental Counter When the Dept. Counter Mode is selected, you can display your selected departmental counter. To use the Dept. Counter Mode, a special service setting is necessary. Contact your authorized Panasonic dealer. For instruction on how to set departmental counters, refer to Example : Dept. Counter Mode (see page 20).
Example : Date Time Setting The clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. So, your clock will automatically set the time forward from 2:00 AM to 3:00 AM on the first Sunday of April or on the 2nd Sunday of March.
Page 31
Select “Input”, and then enter the Date and Time. August/1st/2006 00:00 Select “OK”. Select “Close”. After setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode.
Chapter 3 Copier Settings Copier Settings In Copier User Mode, the following items can be changed. Copier User Parameter Comments Selective Item Standard Setting 0 - 4 Margin Value Set the default margin. 5 mm, 10 mm, 15 10 mm Default mm, 20 mm Edge Value...
Page 33
Copier User Parameter Comments Selective Item Standard Setting 5 - 9 Reduce N in 1 for For N in 1 Copy, set whether to leave a No, Yes Space margin between copy images. • No No margin is inserted. • Yes A margin is inserted.
Page 34
Copier User Parameter Comments Selective Item Standard Setting 5 - 9 Digital Skyshot Enable or disable Digital Skyshot Mode. No, Normal, Quality Normal Mode • No Digital Skyshot Mode is disabled. • Normal Skyshots are used with standard quality. • Quality Skyshots are used with better quality than in “Normal”.
Page 35
Copier User Parameter Comments Selective Item Standard Setting 15 - 19 Img. Repeat Set whether to print perforations between None, Print Print Dotted Line copy images in image repeat copying. • None Perforations are not printed. • Print Perforations are printed. Perforations Staple Position Set the default stapling position.
Key Operator Parameter Comments Selective Item Standard Setting 0 - 9 Print Copier Settings Print a Copier Settings list. Stop, Start Start To cancel printing the copier setting list, press “Stop” and “OK”. While processing the cancellation, panel operation is denied, and an error beep is produced.
Page 37
Key Operator Parameter Comments Selective Item Standard Setting 10 - 19 Bleedthrough Prevention Set the default bleedthrough Off, Level:1 to Level:6 prevention. Contrast Set the default contrast. -3 to +3 Sharpness Set the default sharpness. -3 to +3 Saturation Set the default color saturation. -3 to +3 Tint Set the default tint.
Page 38
Key Operator Parameter Comments Selective Item Standard Setting 30 - 39 Color Spec (Overlay) Set the default overlay color. Full, Red, Magenta, Full Green, Cyan, Blue, “Preset 1 to 6” can be Black, Yellow, White, selected when you set “20 Preset1, Preset2, Add User Color”...
Example : Digital Skyshot Mode Digital Skyshot Mode allows copying an original without generating dark borders even if the platen cover is opened. When copying in “Quality” mode combined with “N in 1” or “2 Page”, the Quality mode will be changed to “Normal”...
Example : Manual Skyshot Mode In Manual Skyshot Mode, the scanning area (size) is pre-registered into memory (M1 and M2) in advance.This mode also allows copying an original without generating dark borders even if the platen cover is opened. An incorrect exposure may occur when there is a black line at the edge of the original. Sort function (Sort, Shift-Sort, Rotate-Sort, Staple-Sort) is not available in Manual Skyshot Mode.
Chapter 4 Fax/Email Settings Fax/Email Settings In Fax/Email Settings Mode, the following items can be changed. For registration of the Address Book or Program Keys, refer to Program Destinations/Program Keys in the Operating Instructions (For Facsimile and Internet Fax) on the provided CD-ROM. Fax/Email Settings Parameter Comments...
Print User Parameter List Print a User Parameter List. Stop, Start Start Logo Set the Logo. Up to 25 characters Ex: Panasonic Character ID Set the Character ID. Up to 16 characters Ex: HEAD OFFICE ID No. Set the Numeric ID.
Page 44
Set the Domain Name added to frequently Up to 50 used or incomplete outgoing Email characters Addresses. Ex: panasonic.com Selectable Domain (01) Set Domain Names to display on the domain Up to 30 list. Up to 10 domain names can be set.
Page 45
User Parameters Parameter Comments Selective Standard Setting Item 30 - 39 Relay XMT Password Set the LAN relay password to provide Up to 10 network security to your Relay Station. characters Refer to Example : Relay Station (LAN Relay) (see page 76). Manager’s Email Addr Set the Department Manager’s Email Up to 60...
Fax Parameters Parameter Comments Selective Item Standard Setting 0 - 39 Print FaxParameterList Print a fax parameter list. Stop, Start Start To cancel printing the fax parameter list, press “Stop” and “OK”. While processing the cancellation, panel operation is denied, and an error beep is produced.
Page 47
Fax Parameters Parameter Comments Selective Item Standard Setting 0 - 39 Header Print Select the printing position of Inside, Outside, Inside sender’s information (Header) No Print on the received original. • Outside If there is no margin (about 10 mm from the edge) to print the sender’s information, the received image may be reduced in size.
Page 48
Fax Parameters Parameter Comments Selective Item Standard Setting 0 - 39 File Accept Report Set whether to print an Invalid, Valid Invalid acceptance report when memory transmission is accepted. The report states the number of accepted originals and the destination. Receive Mode Select a fax reception method.
Page 49
Fax Parameters Parameter Comments Selective Item Standard Setting 0 - 39 Polled File Save Set whether to delete an original Invalid, Valid Invalid from memory after the polling transmission. • Invalid After polling transmission, the original is deleted from memory. •...
Page 50
Fax Parameters Parameter Comments Selective Item Standard Setting 0 - 39 Receive to Memory Set the 4-digit password for printing a memory-received original. If “Receive to Memory” in “More Menus” is “ON”, this setting can not be selected. Refer to Example : Receive to Memory (see page 68).
Page 51
Refer to Example : Select Receive (see page 72). Diagnostic Password Set the diagnostic password. Consult with the authorized Panasonic dealer on how to use this item. Sub-Address Password Set the sub-address password. Up to 20 digits Fax Forward...
Page 52
Fax Parameters Parameter Comments Selective Item Standard Setting 40 - 79 Rotation XMT Enable or disable the Invalid, Valid Valid transmission rotation function. • Invalid An A4/Letter sized portrait original is transmitted as it is. The received original will be reduced or printed on A3 sized paper.
Page 53
Fax Parameters Parameter Comments Selective Item Standard Setting 80 - 119 Duplex Print Enable or disable the duplex Invalid, Valid Invalid printing of a received original. For details about the duplex printing of a received original, refer to Print Reduction in the Operating Instructions (For Facsimile and Internet Fax) on the provided CD-ROM.
Page 54
Fax Parameters Parameter Comments Selective Item Standard Setting 120 - 159 Via Fax Server Set for RightFax function. Invalid, Valid Invalid Job Build and SADF Mode Set “Yes” to use the Job Build No, Yes and SADF function. This function is only available when “05 Memory (HOME)”...
Page 55
Fax Parameters Parameter Comments Selective Item Standard Setting 120 - 159 Email Character Set Set the language when sending / Japanese, English English receiving Email. Sender Selection Set whether to select a pre- Invalid, Valid Invalid programmed sender’s name and Email address before each transmission.
Page 56
Fax Parameters Parameter Comments Selective Item Standard Setting 120 - 159 Del POP Receive Mail Set whether the Email will be Invalid, Valid Valid deleted automatically after retrieval from the POP Server. • Invalid Even after reception from the POP Server, the Email is kept in the POP Server.
Page 57
Fax Parameters Parameter Comments Selective Item Standard Setting 120 - 159 Sub-Addr Routing Set whether to automatically Invalid, Valid Invalid route a received fax or Email using sub-address. Set “Valid” for routing. TSI Routing Set whether to route a received Invalid, Valid Invalid fax to a telephone number or an...
Page 58
(a) Program the Internet Param- eters (b) Program the Auto Dialer (c) Allow retrieval of the Journal Consult with the authorized Panasonic dealer on how to use this item. 160 - 184 Default Domain Set whether the machine Invalid, Valid...
Page 59
Fax Parameters Parameter Comments Selective Item Standard Setting 160 - 184 POP before SMTP If you transmit to the SMTP Invalid, Valid Invalid Server, POP User Name and POP Password are used for authentication. (For details, consult with the network manager.) Direct IFax XMT Set whether to be prompted during Invalid, Valid...
Page 60
Fax Parameters Parameter Comments Selective Item Standard Setting 160 - 184 Color Attachment Set the file format for the Single, Multi Single scanned original attached to Email. When the optional Network Scanner is installed. This setting can be ignored when sending to multi-stations or attaching oversized file in multi-page setting.
Example : LDAP Server To search an Email Address or a Fax Number on LDAP Server, the following user parameter settings are required. LDAP Server Name User parameter 15: LDAP Server Name LDAP Server IP User parameter 16: LDAP Server IP LDAP User Name User parameter 17: LDAP User Name LDAP Password...
Page 63
Select “10-19”. Select “Off” or “On” and then select “OK”. Select Enter the Port Number (up to 5 digits), and then select “OK”. Select “15 LDAP Server Name”. Advance to 17 LDAP User Name, 18 LDAP Password, 19 LDAP Search Base (see page 66).
LDAP Server IP (User parameter 16) This setting is required only when “29 DNS Server Address” in General Settings is set to “No”. When the setting is “Yes” set “15 LDAP Server Name” (see page 62). Press the Function key. Select “00 User Parameters”.
Page 65
Select “16 LDAP Server IP”. Enter the Port Number (up to 5 digits), and then select “OK”. Enter the LDAP Server IP Address (3- Advance to “17 LDAP User Name”, “18 digit x 4), and then select “OK”. LDAP Password”, “19 LDAP Search Base”.
LDAP User Name LDAP Password LDAP Search Base (User parameters 17, 18 and 19) Select “17 LDAP User Name”, “18 LDAP Password”, and “19 LDAP Search Base”. Enter LDAP User name (up to 40 characters), Password (up to 10 characters) and Search Base (up to 60 characters), and then select “OK”.
Example : Receive to Memory Receive to Memory secures all received originals by storing them into memory. To print the original(s) received in memory, the Key Operator must enter the correct password. The procedure of setting Receive to Memory is described below. For memory reception, refer to Receive to Memory in the Operating Instructions (For Facsimile and Internet Fax) on the provided CD-ROM.
Page 69
Select “37 Receive to Memory”. Enter the Identification Code (4-digit), and then select “OK”. (Ex: 1234) If you have made an input error, select “Clear” on the screen to delete all characters at a time. Select “Close”. After setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode.
Example : Password-Transmit / Password-Receive Password-Transmit : Send the original only when the recipient password matches the sender’s password. Password-Receive : Receive the original only when the sender’s password matches the recipient password. For setting the Password-Transmit / Password-Receive, set “43 Password-Transmit” or “44 Password-Receive”...
Page 71
Select “40-79”. Select “On”, and then select “OK”. Select “43 Password-Transmit” or “44 Password-Receive”. Select “Close”. Enter the Identification Code (4-digit), After setting up the function(s), press the Reset key to return the machine to the initial and then select “OK”. screen of the current active mode.
Example : Select Receive Select Receive can prevent the receiving of unnecessary originals (Ex: junk fax, direct mail, etc.). The procedure of setting Select Receive is described below. For more details about Select Receive, refer to Convenient Reception Features in the Operating Instructions (For Facsimile and Internet Fax) on the provided CD-ROM.
Page 73
Select Select “46 Select Receive”. Select “Valid”, and then select “OK”. Select “Close”. After setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode.
Example : Initial Sending Station (LAN Relay) The following setting is required for selecting whether the machine performs LAN Relay XMT Request: Enabling the LAN relay request function Fax parameter 140: LAN RLY XMT Request Set the above item according to the descriptions. For more details about Initial Sending Station (LAN Relay), refer to Use the Relay Feature in the Operating Instructions (For Facsimile and Internet Fax) on the provided CD-ROM.
Page 75
Select “Close”. Select “120-159”, and then select (4 times). Fax Parameters can be directly selected using a keypad for quick operation. If a Parameter No. is known, enter the desired Parameter No. with a keypad, and then press the "Start" key. Ex: In step 6, enter “140”...
Example : Relay Station (LAN Relay) To set up your machine as a Relay Station, the following settings are required: Enabling the LAN Relayed Transmission function Fax parameter 142: Relay XMT Setting the Communication Journal Fax parameter 143: Relay XMT Report Setting the LAN Relay Password User parameter 36: Relay XMT Password Setting the manager’s Email Address...
Relay XMT Report (Fax Select “120-159”, and then select parameter 143) (4 times). Fax Parameters can be directly selected Selecting how the Relay XMT Report is sent to using a keypad for quick operation. If a the originator. Parameter No. is known, enter the desired Parameter No.
Relay XMT Password (User parameter 36) Enter a Relay XMT Password (up to 10 characters) to be used for protection against unauthorized (outside) stations from accessing your machine to relay messages to a G3 fax machine via PSTN. This password should be given out to authorized personnel only. Select “00 User Parameters”.
Manager’s Email Addr (User parameter 37) Enter the Department Manager’s Email Address for notification of all Internet relayed transmissions for supervision and cost control purposes. Select “37 Manager’s Email Addr”. Enter the Email Address (up to 60 characters), and then select “OK”. Advance to Relay Domain 01 to 10 (User parameters 40 to 49) (see page 80), and set the Relay Domains.
Relay Domain 01 to 10 (User parameters 40 to 49) Enter up to 10 Domain Name(s) that have been authorized to access your Internet Fax for Relayed XMT Request. Select “Close”. Select After setting up the function(s), press the Select domain names from “40 Relay Reset key to return the machine to the initial screen of the current active mode.
Chapter 5 Scanner Settings Scanner Settings In Scanner User Mode, the following items can be changed. For details about address book registration, refer to Editing the Address Book in the Operating Instructions (For Scanner and Email) on the provided CD-ROM. Scanner User Parameter Comments...
Scanner User Parameter Comments Selective Item Standard Setting 20 - 29 Add New Address Append a computer IP Address *1 Parameter No.20, 23, and 25 do not require setting as the IP address to the address book. (for the Scanner) is managed (added / edited / deleted) automatically by Add New Email Address Append an Email Address to the...
Chapter 6 Printer Settings Printer Settings In Printer User Mode, the following items can be changed. For printing, however, these settings are unnecessary as the computer application software is usually used to setup printing. Settings by computer application software have priority over the ones in this machine. If the Printer Settings in the machine are required, consult with a computer literate person.
Page 85
Printer User Parameter Comments Selective Item Standard Setting 10 - 19 Mutual A4/LTR Set A4 and LTR substitute Off, On printing. Mailbox Memory Status Display the status of remaining memory and remaining mailbox. Print Data Print the specified data. Stop, Start Stop PDF Password Input Set value to “On”...
Key Operator Parameter Comments Selective Item Standard Setting 0 - 14 Print Printer Settings Print a Printer Settings list. Stop, Start Start To cancel printing the parameter setting list, press “Stop” and “OK”. While processing the cancellation, panel operation is denied, and an error beep is produced.
Page 87
Key Operator Parameter Comments Selective Item Standard Setting 0 -14 Print Queue Delete Set an authorized person who Free, Key Op. Key Op. can delete the print job. • Free Any operator can delete the print job. • key Op. Only Key Operator can delete the print job.
Page 88
"18 Apple Talk" is set to "On", "19 AppleTalk Zone Name", and "20 AppleTalk Printer Name" are not set, then, “Panasonic DP-XXXX and the lower six figures of MAC Address” will be automatically setup. AppleTalk Type Name...
Page 89
Key Operator Parameter Comments Selective Item Standard Setting 15 - 29 Job Polling Time Set the job polling time. 2 to 255 (Sec) 4 (Sec) Select “Input” and enter the job polling time. 30 - 44 Bindery Mode Set Bindery Mode when using Off, On the NetWare.
Page 90
Key Operator Parameter Comments Selective Item Standard Setting 45 - 59 MCP Server Name Set MCP (Memory Card Up to 60 characters Printing) server names. When “29 DNS Server Address” in General Settings is set to “Yes”, and “50 Use MCP Server”...
Chapter 7 Counter View Counter View “Counter View” allows to confirm the number of prints, etc. The Counter View items are listed below. Parameter Comments 0 - 19 Print Counter List Print a Counter List. BK Total Print Count Count numbers of Black Print. 1C Total Print Count Count numbers of Mono Color Print.
Page 93
Parameter Comments 20 - 39 Copy Print Count B/W Count numbers of Copy Black and White Print. Copy Print Count 1C Count numbers of Copy 1-Color Print. Copy Print Count 2C Count numbers of Copy 2-Color Print. Copy Print Count 4C Count numbers of Copy 4-Color Print.
Example : Print Counter List Print Counter View information. Customer Name space, Signature & Date space, Customer ID, Fax No. and Serial Number are printed on the lower right corner. Press the Function Key. Select "Start", and then select "OK". Stop : Stop to printing counter list Select "Counter View".
Example : Clear Toner Counter After replacing the Toner Cartridge, the Toner Counter will be cleared automatically. If you want to clear the Toner Counter manually, the following procedure is required. Press the Function key. Select “Yes” to clear the Toner Counter.
Chapter 8 Index Appendix Clear Toner Counter M ...........92 Numerics Clear Toner Counter Y ...........92 Color Attachment ............60 1C Total Print Count ............92 Color Balance ..............37 2C Total Print Count ............92 Color Mode Default ..........36, 82 2-Sided Count ..............93 Color Spec (1Color) ............37 2-Sided Mode Default ............
Page 97
DHCP Default ..............14 Diagnostic Password ............51 Dial Prefix ...............53 ID No................43 Dial Tone Check .............51 ID Timeout ..............19 Dialing Method ...............46 IFax Return Receipt ............56 Digital Skyshot Mode ............34 IFax XMT Header ............58 Direct IFax XMT .............59 Img.
Page 98
Memory (HOME) ............46 Power On Default Mode ..........10 Memory Overflow Warning ..........37 Power Save Mode Timer ..........13 Memory Size ..............53 Print Address Book List ..........42 Modify Group Dial ............42 Print Copier Settings ............36 Modify Station ..............42 Print Counter List ............92 Modify User Color ............
Page 99
Routing Menu Function ..........15 Text Density ..............36 RSV. a Job Setting Clr ...........38 Text Print ................ 86 TIFF Viewer URL ............58 Time Zone ..............43 Tint ................. 37 Saturation ...............37 Tone Adjust Reset ............19 Scanner Count (ADF) .............92 Toner Save ..............
Page 100
MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PANASONIC DIGITAL DOCUMENT COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY THE CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC MACHINE.