Detaching The Arm/Base (For Vesa Wall Mount) - Asus VS248H User Manual

2.3 Detaching the arm/base (for VESA
wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes. (Figure 1)
3. Remove the base (Figure 2).
4. Pry the rear hinge cover (Figure 3).
5. Use a screwdriver to remove the four screws on the hinge (Figure 4), then
remove the hinge.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2-2
Figure 1
Figure 3
1
2
Figure 2
Figure 4
Chapter 2: Setup