Sharp MX-3110N Operation Manual page 11

Sharpdesk Mobile Operation Manual
Copyright © 2012 SHARP CORPORATION All rights reserved.
IV. Set the document on the scanner and configure
resolution, file format, color mode or other settings.
Select the destination on "Address Book" in
"Fax/Image Send" so that the destination is the same
as "Display Name" configured in Chapter 5 of page 9,
"Set up User Information."
Push Start button on the scanner to execute scanning.
V. Scanned data is sent to the device and the device
stores the data into the memory.
If multiple scanned data is received, the list of
scanned data is listed. Tap "Save" in the right side of
"Scan" title bar to store these data.
(note) Tap any data to preview received data from the list.
However, this data can only be stored together with
the rest of the received data.
VI. If a single data is received, the content of the data is
displayed.
Tap "Save this Image" button at the bottom of the
screen to store this data in the application.
11