Bios Beep Codes - Asus P4XP-X User Manual

User manual
Hide thumbs Also See for P4XP-X:
Table of Contents

Advertisement

3.
Press Y to start the auto-recovery procedure. If you do not press Y, the system
still performs the auto-recovery after 30 seconds.
The recovered BIOS may not be of the same version as the original BIOS. Visit
ASUS website (www.asus.com) to download the latest BIOS for this
motherboard, and update the BIOS using ASUS AFLASH.EXE, ASUS EZ Flash
Utility, or ASUS Live Update.
Using the bootable floppy disk:
1. Boot the computer using the bootable floppy disk.
2. Execute the AFLASH.EXE utility. See section 2.1.2 for the procedure.
3. If the BIOS image is newer than the current BIOS, or if the BIOS is corrupted,
this confirmation message appears.
"Are you sure? (Y/N)"
4. Press Y to update the BIOS.

2.1.4 BIOS beep codes

When you turn the power on and the system runs POST (Power On Self Tests),
you will hear BIOS beeps. Refer to the following table for the meaning of the
beeps.
Award BIOS Beep Codes
Beep
One short beep when
displaying logo
Long beeps in an endless loop
One long beep followed by
three short beeps
High frequency beeps when
system is working
2-8
Meaning
No error during POST
No DRAM installed or detected
Video card not found or video card
memory bad
CPU overheated;
System running at a lower frequency
Chapter 2: BIOS information

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P4XP-X and is the answer not in the manual?

Questions and answers

Table of Contents