Viewing The Display Screen; Turning Your Phone On And Off - Sanyo 4700 - SCP Cell Phone User Manual

Viewing the Display Screen

This list identifies the symbols you'll see on your display screen.
shows your current signal strength. The more
lines you have, the stronger your signal.
means your phone cannot find a signal.
tells you a call is in progress.
indicates you are "roaming" off the Sprint PCS
Nationwide Network.
indicates you have voicemail, text, numeric
messages or Sprint PCS Web Alert waiting.
Press to call your voicemail box.
indicates the vibrate mode.
indicates the Speaker Phone mode is set to ON.
shows your current battery charge strength.
(Icon shown fully charged.)
Section 2
16 Getting to Know Your Sprint PCS Phone

Turning Your Phone ON and OFF

Turning Your Phone ON
To turn your phone on, press
seconds.
Once your phone is ON, it displays "Looking for Service..."
indicating that your phone is searching for a signal. When
your phone finds a signal, it automatically enters Standby
mode – the phone's idle state. At this point, you are ready to
begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In power save mode, your phone searches for a signal
periodically without your intervention. You can also initiate
a search for Sprint PCS Service by pressing any key (when
your phone is turned ON).
Turning Your Phone OFF
Press for two seconds until you see "Powering off" on
the display screen.
Your screen remains blank while your phone is off.
Getting to Know Your Sprint PCS Phone 17
for approximately two
Section 2