Dell 1110 - Laser Printer B/W User Manual page 25


Load a sheet of card stock with the side to be printed on facing up, short edge first, from
the center of the tray.
NOTE: Do not print on media smaller than 3.0 in. (76 mm) wide or 5.0 in. (127 mm) long.

Load a letterhead in the tray with the design face up, top edge toward the printer.
NOTE: Before you load letterhead, verify that the ink on the paper is dry. During the fusing
process, wet ink can come off preprinted paper.
Printing
Printing a Document
Printer Settings
Printing Multiple Pages on One Sheet of Paper
Fitting Your Document to a Selected Paper Size
Printing a Reduced or Enlarged Document
Using Watermarks