PT-52LCX66 / PT-56LCX66 / PT-61LCX66 / PT-52LCX16 / PT-56LCX16
REMOVAL OF THE MIRROR FROM THE BACK COVER
1. Remove the Screen Unit. Refer to Steps 1 ~ 2 in "REMOVAL OF THE SCREEN UNIT FROM THE DISPLAY."
2. (For 52 inch models)
1) Remove the 2 Mirror Holder H Units and the 2 Mirror Holder V Units by removing the 8 Screws (401).
2) Remove the Mirror from the top by releasing the Back Cover slots.
Note: The Mirror is fragile. Handle with extreme care.
Mirror Holder
H Units
401
401
Reassembly Notes for Mirror:
Install the Mirror using the following procedures:
1) Hold the edge of the Mirror, and insert the Mirror from the top into the Back Cover slots carefully.
When handling the Mirror, do not touch the Mirror surface.
2) Install the 2 Mirror Holder H Units and the 2 Mirror Holder V Units on the Mirror and tighten the 8 Screws (401).
401
Mirror Holder V Units
Mirror
401
Fig. D6-1
44
Back Cover slots