System Board Switches - HP Kayak XW A2-U2-W2 Technical Information

HP Kayak XW 0480 PC Workstation — Technical Information
System Connectors and Switches

System Board Switches

Your PC Workstation's
system board switches
may look like either of the
examples documented
here.
Switches 2 through 5 are used for processor settings and should be
changed if the processor supplied with the PC Workstation is replaced
with a faster one.
Switches 6 to 10 are used as shown in the following table:
Switch
1 - RESERVED
6 - CLEAR CMOS
7 - CLEAR PASSWORD
8 - KEYBOARD POWER ON
9 - RESERVED
10 - BIOS RECOVERY
8 English
UP=OFF
DOWN=ON
Use Switch to:
Do not use (OFF — DEFAULT)
Retain or clear CMOS memory:
• OFF to retain CMOS memory — DEFAULT
• ON to clear CMOS memory.
Enable or clear (and disable) User and System Administrator Passwords
stored in EEPROM:
• OFF to enable passwords — DEFAULT
• ON to clear passwords.
Enable or disable power on using the keyboard:
• OFF to disable keyboard power on
• ON to enable keyboard power on — DEFAULT.
Do not use (ON — DEFAULT)
• OFF to enable normal mode — DEFAULT.
• ON to enable recovery mode.
OPEN=OFF
CLOSED=ON