Table of Contents
Advertisement
Supplied accessories
Check that you have received all of the following parts.
Remote control ( 1)
STANDBY/ON
POWER
POWER
AV
TV
DOCK
DVD
AUX1
AUX2
AUX3
TV
MACRO
INPUT1
STB
TV
PRESET/TUNE
SEARCH
MEMORY
FM/XM
CAT
AUTO
VOL MODE
SETUP
INPUTMODE
SLEEP
5BEAM
ST+3BEAM
3BEAM
1
2
3
STEREO
MY BEAM
MY SUR.
4
5
6
MUSIC
MOVIE
SPORTS
7
8
9
OFF
SUR. DECODE
+10
0
ENHANCER
ENTRY
MENU
TV/AV
CAT/
ENTER
A-E
YSP
DISPLAY
RETURN
TV VOL
VOLUME
CH
MUTE
TV INPUT
TV MUTE
CODE SET
CH LEVEL
TEST
(U.S.A. and Canada models)
Batteries ( 2)
(AA, R6, UM-3)
Demonstration DVD
( 1)
6
En
Supplied accessories
Fasteners ( 4)
Cable clamp ( 1)
IntelliBeam microphone
( 1)
Cardboard microphone
stand ( 1)
Indoor FM antenna ( 1)
OSD* video pin cable ( 1)
(Yellow)
*OSD: On-Screen Display
Optical cable ( 1)
Digital audio pin cable ( 1)
(Orange)
Audio pin cable ( 1)
(White/Red)
REFERENCE GUIDE
(iPod/XM Radio) ( 1)
UA
YSP-3000
Digital Sound Projector
TM
Reference Guide for iPod/XM Radio
Overview
This is the Reference Guide for Yamaha YSP-3000 Digital Sound Projector. This guide explains the connections and
operations of iPod and XM Satellite Radio (U.S.A. and Canada models only). Operations in this guide use keys on the
supplied remote control unless otherwise specified. For general information including the controls and functions of this
unit, refer to the owner's manual.
The illustrations used in this Reference Guide are for U.S.A. and Canada models only.
iPod
TM
"iPod" is a trademark of Apple Inc., registered in the U.S. and other countries.
The XM name and related logos are registered trademarks of XM Satellite Radio Inc.
Neural Surround
™
name and related logos are trademarks owned by Neural Audio Corporation.
Contents
Using iPod™........................................................................................................................................ 2
Connection................................................................................................................................................. 2
Controlling iPod™ ....................................................................................................................................2
XM Satellite Radio tuning (U.S.A. and Canada models only)........................................................ 5
Connecting XM Mini-Tuner Home Dock ................................................................................................. 5
Activating XM Satellite Radio .................................................................................................................. 6
Basic XM Satellite Radio operations ........................................................................................................ 6
Presetting the XM Satellite Radio channels .............................................................................................. 9
Displaying the XM Satellite Radio information...................................................................................... 10
Troubleshooting ................................................................................................................................ 11
(U.S.A., Canada, and Australia
models only)
QUICK REFERENCE
GUIDE
2
Items used for connections and operations
Connecting external components to this unit
in this guide
Audio pin cable (x1)
OSD* video pin cable (x1)
Connecting external components such as a TV or DVD player to this unit.
Optical cable (x1)
YSP-3000
Digital audio pin cable (x1)
IntelliBeam microphone (x1)
Connect your TV or DVD player to this unit using appropriate cables as shown below.
After all connections are complete, plug the power supply cable into the AC
wall outlet.
For further information on connecting other components, see pages 19 to 29 in the Owner's Manual.
This connection example shows a way to make the most of the capability of this unit.
Cardboard microphone stand (x1)
Connection
Demonstration DVD (x1)
enjoy DVD audio and video with higher quality via the HDMI cable.
QUICK REFERENCE GUIDE
example 2
*OSD: On-Screen Display
a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite
This connection example shows a way to connect external components such as a TV or DVD player to
tuner, cable TV tuner, or digital airwave tuner via the HDMI cable. For details, see "Connections
Connection
this unit by using the supplied cable.
You can enjoy the multi-channel audio from the DVD player and the
using HDMI cables" on page 21 in the Owner's manual.
This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the
example 1
analog/digital audio from the TV.
Use the video pin cable supplied with your DVD player to make a video
surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner's Manual.
connection between your DVD player and TV.
TV
1
Installing this unit
DVD player
TV
Decide where to install this unit.
DVD player
Optical cable
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired
1. Pull out the cap
VIDEO
HDMI
HDMI
surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.
INPUT
INPUT
OUTPUT
Video connection
Pull out the cap
1
before connecting
2
Install this unit in the exact center of the wall when it is
Install this unit in the corner at a 40˚ to 50˚ angle from the
the optical cable,
measured from the left and right corners.
adjacent walls.
ANALOG AUDIO
VIDEO
OPTICAL
COAXIAL
and then check the
OUTPUT
INPUT
AUDIO OUTPUT
AUDIO OUTPUT
2. Check the direction
direction to insert the
L
1
cable.
1
2
(Sold separately)
R
2
An object, such as furniture
An object, such as furniture
Front left channel
40˚ to 50˚
Front left channel
1
2
3
4
Center channel
Center channel
AUDIO INPUT
OUT
DIGITAL INPUT
Front right channel
Front right channel
VIDEO
AUX 2
DVD
YSP-3000
To the AC wall
COAXIAL
outlet
Surround left channel
Surround left channel
Subwoofer
AUDIO INPUT
OUT
DIGITAL INPUT
Surround right channel
Surround right channel
AUX 1
TV/STB
SUBWOOFER
AUX 1
TV/STB
Do not plug the power
VIDEO
AUX 2
DVD
supply cable into an AC
COAXIAL
Audio connection
wall outlet until all
connections are complete.
AUX 1
TV/STB
SUBWOOFER
AUX 1
TV/STB
The rear panel illustration shows jacks and their names to help you find them easily. They
*
Audio connection
Install this unit using a rack, etc.
are not exactly the same as the ones on the actual rear panel of this unit.
Depending on your installation environment, connections with external components (see "2 Connecting external components to this unit") can be done before
installing this unit.
We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
In case you
*
The rear panel illustration shows jacks and their names to help you find them easily. They
install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.
Connect cables in the following order.
are not exactly the same as the ones on the actual rear panel of this unit.
For further information on installation, see page 16 in the Owner's Manual.
Supplied
The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of
Connect cables in the following order.
cloth on the floor in step 2.
1 Audio pin cable
1
Place this unit in front of
2
Place this unit upside
3
Install this unit in the
4
Installation is completed.
Supplied
(Outputs
TV analog audio sounds
from this unit)
the rack.
down and connect this unit to
rack.
2 OSD video pin cable
1 OSD video pin cable
your TV and DVD player.
(Displays
the YSP-3000 menu screen
on the TV)
(Displays
the YSP-3000 menu screen
on the TV)
3 Optical cable
(Outputs
TV digital audio sounds
from this unit)
4 Digital audio pin cable
(Outputs
DVD digital audio sounds
from this unit)
Hint
• If you connect this unit to an HDMI control-compatible TV
(except some models) via HDMI, you can use the remote
Hint
Hint
control supplied with your TV to turn on or off the power,
• To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
Check whether the digital audio output of your TV and DVD
If you have connected external components,
select the audio output component, and adjust the volume
• You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions
player is turned on.
level of this unit.
supplied with the metal wall bracket.
follow the steps on the backside to start the
Continued
• Check whether the digital audio output of your TV and DVD
AUTO SETUP procedure.
on the back
Note
player is turned on.
Be careful not to leave scratches on this unit or the rack.
Printed in Malaysia
WK75520 [En]
* The number of provided languages
varies depending on the sales area.
You can
In case your TV does not have
Digital satellite tuner/Cable TV tuner/
Digital airwave tuner
HDMI connection
AUX 1
3
(Sold separately)
DVD
IN
HDMI
OUT
YSP-3000
To the AC wall
outlet
Subwoofer
Do not plug the power
supply cable into an AC
wall outlet until all
connections are complete.
Sold separately
2 HDMI cable
(Displays
the DVD digital video
on the TV)
3 HDMI cable
(Inputs
DVD digital audio/video signals
to this unit)
If you have connected external components,
follow the steps on the backside to start the
Continued
AUTO SETUP procedure.
on the back
C2007
All rights reserved.
Advertisement
Table of Contents
Troubleshooting
