Changing The Size Of The Pattern - Brother Quattro 2 6700D Operation Manual
Embroidery and sewing machine
Hide thumbs
Also See for Quattro 2 6700D:
- Operation manual (50 pages) ,
- Instruction manual (40 pages) ,
- Manual de instrucciones (16 pages)
Table of Contents
Advertisement
a
Mark the embroidery start position on the
fabric, as shown.
b
Press
.
c
Press
.
a
b
a Start position
b This key is used for aligning linked characters (see
page 245).
→ The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).
d
Press
.
e
Use
to align the needle and the mark
on the fabric, and begin embroidering the
pattern.
Changing the Size of the Pattern
a
Press
.
b
Select the direction in which to change the
size.
*
Press
to enlarge the pattern proportionately.
*
Press
to shrink the pattern proportionately.
*
Press
to stretch the pattern horizontally.
*
Press
to compact the pattern horizontally.
REVISING THE PATTERN
5
241
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Quattro 2 6700D and is the answer not in the manual?
Questions and answers
when I attach embroidery foot W to my quattro 2, and lower the presser foot, it sits too high to embroider. its about 1/2" too short.
The embroidery foot W may sit too high when attached to the Brother Quattro 2 6700D if the embroidery foot height setting is too high. The height can be adjusted in the embroidery settings screen to ensure proper spacing between the presser foot and the needle plate, especially for thick or puffy fabrics.
This answer is automatically generated