Yamaha DME-N Installation Manual page 5

1
Log onto Windows with Administrator privileges.
NOTE In order to use the DME-N Network Driver, the computer and the device must be properly connected and
configured. For details on connections, refer to
configuration, refer to
2
Access the Control Panel.
3
If the control panel appears as category view, switch the view as follows:
For Windows XP
Click [Switch to Classic View] in the upper left of the control panel.
For Windows Vista
Click [Classic View] in the upper left of the control panel.
For Windows 7 / 8
Click [View by : Category] in the upper right of the control panel, and select "Large icons" or "Small icons".
4
Double-click [DME-N Network Driver] icon.
The "DME-N Network Driver" dialog box will appear.
NOTE When running under Windows Vista / 7 / 8, the "User Account Control" dialog box may appear. Click [Continue] or
[Yes].
NOTE If an application that uses the DME-N Network Driver is running at this time the "Quit all applications that use the
DME-N Network Driver in order to change settings." message will appear. The DME-N Network Driver settings
cannot be changed while any application that uses the DME-N Network Driver is running.
DME-N Network Driver Installation Guide for M7CL/LS9/DSP5D
Setup
"Connection of computer and
"TCP/IP Settings" and "Troubleshooting
device". For details on
(FAQ)".
5