Onkyo PR-SC5509 Owner's Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Controller
  5. PR-SC5509
  6. Owner's manual

Onkyo PR-SC5509 Owner's Manual

Av controller
Hide thumbs Also See for PR-SC5509:
Table of Contents

Advertisement

Quick Links

AV Controller
PR-SC5509
Instruction Manual
Thank you for purchasing an Onkyo AV Controller.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Controller.
Please retain this manual for future reference.
Contents
Introduction ...................................2
Connections.................................12
Turning On & Basic Operations ......25
Advanced Operations .................48
Controlling Other Components...77
Appendix ......................................86
E
n

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PR-SC5509 and is the answer not in the manual?

Questions and answers

Related Manuals for Onkyo PR-SC5509

Summary of Contents for Onkyo PR-SC5509

  • Page 1 Instruction Manual Advanced Operations ....48 Controlling Other Components...77 Appendix ........86 Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Controller.

  • Page 2: Introduction

    Introduction WARNING: AVIS WARNING RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE.

  • Page 3: Precautions

    003 DU CANADA. wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer. Sur les modèles dont la fiche est polarisée: 8. Handling Notes ATTENTION: POUR ÉVITER LES CHOCS...

  • Page 4: Supplied Accessories

    LIEGNITZERSTRASSE 6, Remote control sensor 82194 GROEBENZELL, GERMANY AV controller declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY K.

  • Page 5: Table Of Contents

    Connecting a Recording Component ......23 Controlling Other Components Connecting the Antennas ..........24 Connecting the Power Cord ......... 24 iPod/iPhone Playback via Onkyo Dock ......77 Using the Onkyo Dock..........77 Turning On & Basic Operations Controlling Your iPod/iPhone ........78 Controlling Other Components........

  • Page 6: Features

    -Vida Video Processing with 1080p Video • 8 HDMI Inputs (1 on front panel) and 2 Outputs upscaling of All Video Sources via HDMI • Onkyo for System Control • HDMI (Audio Return Channel, 3D, DeepColor, • 7 Digital Inputs (4 Optical/3 Coaxial) x.v.Color...
  • Page 7 Qdeo and QuietVideo are trademarks of Marvell or its This HD Radio Ready™ receiver is ready to receive affiliates. HD Radio broadcasts when connected to the Onkyo UP-HT1 ® (Hollywood Quality Video) is registered trademark of HD Radio tuner module (sold separately).

  • Page 8: Front & Rear Panels

    Front & Rear Panels Front Panel (North American models) (European and Asian models)

  • Page 9: Display

    For detailed information, see the pages in parentheses. ON/STANDBY button (25) PHONES jack (46) ZONE 2, ZONE 3, and OFF buttons (74) Remote control sensor and transmitter (4) TONE and Tone Level buttons (70, 75) Display (9) MASTER VOLUME control and indicator (26, 74) MONITOR OUT button (49) HDMI THRU indicator (67) DISPLAY button (45)

  • Page 10: Rear Panel

    Rear Panel UNIVERSAL PORT jack 12V TRIGGER OUT (A/B/C) jacks IR IN (A/B) and OUT jacks Composite, S-Video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, DIGITAL IN COAXIAL and OPTICAL jacks CBL/SAT IN, GAME IN, PC IN, TV/CD IN and USB port PHONO IN) ETHERNET port...

  • Page 11: Remote Controller

    Controlling the AV Controller To control the AV controller, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See “Entering Remote Control Codes” for more page 81).

  • Page 12: Connections

    Connections Connecting the AV Controller Connecting Your Speakers The AV controller is designed to be used with a separate multichannel power amplifier. You connect the AV controller’s PRE OUT jacks to the amplifier’s inputs, and connect your speakers to the amplifier’s speakers terminals. Speaker settings such as crossover frequency and distance are set on the AV controller.
  • Page 13 Connecting a Power Amplifier via XLR Jacks You can connect the AV controller to a multichannel power amplifier via balanced XLR jacks by using several XLR audio cables. The AV controller’s balanced PRE OUT jacks are wired as shown. See your multichannel power amplifier’s instruction manual for more information on connecting speakers. AV controller Multichannel power amplifier...
  • Page 14 Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, 2 powered subwoofers are recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings automatically (➔...
  • Page 15 Using Powered Subwoofers ■ Connection via RCA Jacks You can connect the powered subwoofers to SW1 PRE OUT LINE INPUT and SW2 PRE OUT respectively. LINE INPUT The level and distance can be set individually for each output. If you’re using only one subwoofer, connect it to SW1 PRE OUT.
  • Page 16 Bi-amping the Front Speakers Important: • When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals. • Bi-amping can be used only with speakers that support bi-amping. Refer to your speaker manual. Bi-amping provides improved bass and treble performance.
  • Page 17 ■ Connection via XLR Jacks AV controller Multichannel power amplifier Tweeter (high) Woofer (low) Front right Front left...

  • Page 18: About Av Connections

    About AV Connections Connecting AV components : Video & Audio : Video : Audio HDMI cable Other cables AV controller AV controller Blu-ray Disc/ Blu-ray Disc/ DVD player DVD player TV, projector, etc. TV, projector, etc. Game console Game console •...

  • Page 19: Connecting Components With Hdmi

    Note • The AV controller does not support SCART plugs. • The AV controller’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed. Push plugs in all the way. Caution •...
  • Page 20 Note • When listening to an HDMI component through the AV controller, set the HDMI component so that its video can be seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV controller). If the TV power is off or the TV is set to another input source, this may result in no sound from the AV controller or the sound may be cut off.

  • Page 21: Connecting Your Components

    Connecting Your Components The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV controller’s display when changing settings. Front Rear Connect your components to the appropriate jacks. The default input assignments are shown below. See “Connection Tips and Video Signal Path”...
  • Page 22 Jack/Port Components Assignable MONITOR OUT TV, projector, etc. BD/DVD IN Blu-ray Disc/DVD player VCR/DVR IN VCR or DVD recorder/digital video recorder, RI dock CBL/SAT IN Satellite/cable set-top box, etc. GAME IN Game console, RI dock PC IN Personal computer TV/CD IN TV, CD player, cassette tape deck, MD, CD-R, Turntable , RI dock...

  • Page 23: Connecting Onkyo Components

    Connecting Onkyo Components Make sure that each Onkyo component is connected with an analog audio cable (connection in the hookup examples) (➔ page 21). Make the connection (see the illustration). If you’re using an RI Dock or cassette tape deck, change the Input Display (➔...

  • Page 24: Connecting The Antennas

    Connecting the Antennas This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV controller won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. North American models European and Asian models...

  • Page 25: Turning On & Basic Operations

    Turning On & Basic Operations Turning On/Off the AV Controller (North American models) (European and Asian models) ON/STANDBY ON/STANDBY RECEIVER RECEIVER POWER Turning On (European and Asian models) POWER to the ON position ( ) on the front panel. The AV controller enters standby mode. Press ON/STANDBY on the front panel.

  • Page 26: Playback

    (➔ page 30) page 31) • “Listening to AM/FM Radio” (➔ TOP MENU • “iPod/iPhone Playback via Onkyo Dock” (➔ page 77) This button displays the top menu for each media or service. • “Controlling Other Components” (➔ page 80) / and ENTER These buttons navigate through the menus.

  • Page 27: Understanding Icons On The Display

    MENU Playing an iPod/iPhone via USB This button returns to top menu of the Internet Radio This section explains how to play music/video files on the service. iPod/iPhone. RETURN Compatible iPod/iPhone models This button returns to the previous menu. Made for: iPod touch (1st, 2nd, 3rd and 4th generation), iPod classic, This button selects the next song.

  • Page 28: Playing A Usb Device

    (Video) is not guaranteed. any time. To enhance your Internet radio experience, the Standard Mode control http://onkyo.vtuner.com/ portal is available to you as an easy way to browse to find stations, set up/organize your The content information is not displayed, but can be favorites, add your own stations, get help, etc.
  • Page 29 Registering My Favorites Use / to select a program and then press ENTER. You can add the currently playing song or station to the Playback starts. “My Favorites”. You can save up to 40 Internet radio stations. Once you’ve added a station to the list, simply select it in the “My Favorites”...

  • Page 30: Playing Music Files On A Server

    Windows Media Player 11 Setup Playing Music Files on a Server This section explains how to configure Windows Media Player 11 so that the AV controller can play the music You need to connect the AV controller to your home files stored on your computer.

  • Page 31: Listening To Am/Fm Radio

    Using Remote Playback Listening to AM/FM Radio Start Windows Media Player 12. This section describes the procedure using the To enable remote playback, you must first configure buttons on the front panel unless otherwise specified. Windows Media Player 12. Using the Tuner Press NET.
  • Page 32 ■ ■ Tuning into stations by frequency Deleting Presets You can tune into AM and FM stations directly by Select the preset that you want to delete. entering the appropriate frequency. See the previous section. On the remote controller, press TUNER repeatedly While holding down MEMORY, press TUNING to select “AM”...
  • Page 33 ■ Displaying Radio Text (RT) RDS program types (PTY) Type Display Press RT/PTY/TP once. None None The RT information scrolls across the display. News reports News Note Current affairs Affairs • The message “Waiting” may appear while the AV Information Info controller waits for the RT information.

  • Page 34: Using Basic Functions

    Using Basic Functions Using the Automatic Speaker Setup With the supplied calibrated microphone, Audyssey MultEQ ® XT32 automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening position.
  • Page 35 Press ENTER. When you’ve finished making the settings, press ENTER. Audyssey MultEQ ® XT32 Room Correction and Speaker Setup starts. MultEQ XT32: Auto Setup Test tones are played through each speaker as AUDYSSEY Speakers Type(Front) Normal Audyssey MultEQ XT32 Room Correction and Front High + Front Wide Front High / Front Wide Preout Front High...
  • Page 36 • Writing Error! This message appears if saving fails. Try saving again. If this message appears after 2 or 3 attempts, contact your Onkyo dealer. • Speaker Detect Error This message appears if a speaker is not detected. “No” means that no speaker was detected.

  • Page 37: Using The Listening Modes

    Using the Listening Modes Selecting Listening Modes page 38). See “About Listening Modes” for detailed information about the listening modes (➔ ■ Listening Mode Buttons Press RECEIVER first. PURE AUDIO MOVIE/TV, MUSIC, GAME, THX MUSIC GAME MOVIE/TV MOVIE/TV button PURE AUDIO button and indicator This button selects the listening modes intended for use This button selects the Pure Audio listening mode.
  • Page 38 About Listening Modes The AV controller’s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. ■ Explanatory Notes Front speakers Center speaker Surround speakers Subwoofer(s) Surround back speakers Listening Front high speakers mode buttons...
  • Page 39 ■ Onkyo-Original DSP Listening Modes Listening Mode Description Input Speaker Source Layout Orchestra Suitable for classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural O r c e s t r a reverberation of a large hall.
  • Page 40 Listening Mode Description Input Speaker Source Layout Dolby Pro Logic IIx Dolby Pro Logic IIx expands any 2-channel source for 7.1-channel Dolby Pro Logic II playback. It provides a very natural and seamless surround-sound experience that fully envelops the listener. As well as music and movies, video games M o v i e can also benefit from the dramatic spatial effects and vivid imaging.
  • Page 41 Listening Mode Description Input Speaker Source Layout DTS-ES Discrete This mode is for use with DTS-ES Discrete soundtracks, which use a discrete surround back channel for true 6.1/7.1-channel playback. The seven i s c r e t e totally separate audio channels provide better spatial imaging and 360- degree sound localization, perfect for sounds that pan across the surround channels.
  • Page 42 Listening Mode Description Input Speaker Source Layout Founded by George Lucas, THX develops stringent standards that ensure movies are reproduced in movie theaters and home theaters just as the director intended. THX Modes carefully optimize the tonal and spatial characteristics of the soundtrack for reproduction in the home-theater environment.
  • Page 43 Listening Mode Description Input Speaker Source Layout • THX Ultra2 Cinema N e o T H X C i n e m a This mode expands 5.1-channel sources for 7.1- channel playback. It does this by analyzing the composition of the surround source, optimizing the T H X M u s i c ambient and directional sounds to produce the surround back channel...

  • Page 44: Using The Home Menu

    ■ Listening Mode Using the Home Menu You can select the listening modes that are The Home menu provides you quick access to frequently grouped in the following categories: used menus without having to go through the long MOVIE/TV, MUSIC, GAME and THX. standard menu.

  • Page 45: Setting The Display Brightness

    Setting the Display Brightness Changing the Input Display You can adjust the brightness of the AV controller’s When you connect an -capable Onkyo component, you display. must configure the input display so that can work properly. Press RECEIVER followed by DIMMER This setting can be done only from the front panel.

  • Page 46: Muting The Av Controller

    ■ MY MOVIE standard plug (1/4 inch or 6.3 mm) to the First, the TV, the Onkyo Blu-ray Disc player, and the AV PHONES jack. controller are turned on. The input selector is set to While the headphones plug is inserted in the “BD/DVD”.

  • Page 47: Recording

    Changing the Source Components You can change the source components activated by the Easy Macro mode. While holding down REMOTE MODE for the playback component you wish to assign, press and hold down the ACTIVITIES to be changed (MY MOVIE, MY TV, or MY MUSIC) (about 3 seconds).

  • Page 48: Advanced Operations

    Advanced Operations Advanced Setup Common Procedures in Setup Menu The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV controller’s display when changing settings. This section describes the procedure for using the RECEIVER remote controller unless otherwise specified.

  • Page 49: Input/Output Assign

    Both(Main): Input/Output Assign Select this if your TVs are connected to HDMI OUT MAIN and HDMI OUT SUB. Video signals are Main Menu Input/Output Assign output from both HDMI outputs but HDMI OUT MAIN will become a priority; depending on the Monitor Out resolution, video signals may not be output from HDMI OUT SUB.
  • Page 50 ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, TV/CD, PHONO, PORT • The “Resolution” setting is set respectively of main, sub, and HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, analog. HDMI6, HDMI7: • To view the TV picture while setting, press ENTER. Select a corresponding HDMI input to which the Note video component has been connected.
  • Page 51 Component Video Input Digital Audio Input If you connect a video component to a component video If you connect a component to a digital audio input, you input, you must assign that input to an input selector. For must assign that input to an input selector. For example, if example, if you connect your Blu-ray Disc/DVD player to you connect your CD player to the OPTICAL IN 1, you COMPONENT VIDEO IN 2, you must assign “IN2”...

  • Page 52: Speaker Setup

    ■ Subwoofer Input Sensitivity Speaker Settings 0dB to 15dB in 5 dB steps. Some DVD players output the LFE channel from their If you change these settings, you must run analog subwoofer output at 15 dB higher than normal. Audyssey MultEQ XT32 Room Correction and With this setting, you can change the AV controller’s Speaker Setup again (➔...
  • Page 53 Speaker Configuration Note “Full Band” can be selected only when “Full Band” is selected in the “Front” setting. This setting is set automatically by If the “Surround” setting is set to “None”, this setting cannot Audyssey MultEQ ® XT32 Room Correction and be selected.
  • Page 54 ■ Subwoofer Phase Level Calibration 0º 180º: This setting is set automatically by Moves the subwoofer phase. Audyssey MultEQ XT32 Room Correction and Speaker Note Setup function (➔ page 34). • If the “Subwoofer” setting is set to “No”, this setting cannot be Here you can adjust the level of each speaker with the selected.
  • Page 55 ■ Equalizer Settings THX Ultra2/Select2 Subwoofer With the Equalizer settings, you can adjust the tone of speakers individually with a 7-band equalizer. The volume If you’re using a THX-certified subwoofer, set this setting of each speaker can be set. to “Yes”. ■...

  • Page 56: Audio Adjust

    Dimension Audio Adjust –3 to 0 to +3 With this setting, you can move the sound field forward or Main menu Audio Adjust backward when using the Dolby Pro Logic IIx Music With the Audio Adjust functions and settings, you can listening mode.
  • Page 57 ■ Dolby Volume ■ Neo:X Music Dolby Volume automatically adjusts the difference in Center Image volume levels which can occur between different contents 0 to 2 to 5 or source components, freeing the user from having to The DTS Neo:X Music listening mode creates 9-channel make volume adjustments.
  • Page 58 LFE Level Sound Program Edit ■ ■ Dolby Digital , DTS , Multich PCM, Dolby Sound Program TrueHD, DTS-HD Master Audio, DSD Stereo Source 1, Stereo Source 2, Stereo Source 3, Multich Source 1, Multich Source 2, Multich – dB, –20dB, –10dB, or 0dB Source 3 With these settings, you can set the level of the LFE (Low When playing back different content types on the same...

  • Page 59: Source Setup

    ■ Dynamic EQ Note • “Listening Mode” is only available when the input signal matches the setting of “Sound Program”. Audyssey Dynamic EQ ® becomes active. • “Music Optimizer” is only available when “Stereo Source 1”, The Dynamic EQ indicator lights. “Stereo Source 2”...
  • Page 60 ■ Dynamic Volume IntelliVolume ■ IntelliVolume Light: Activates Light Compression Mode. –12dB to 0dB to +12dB in 1 dB steps. Medium: With IntelliVolume, you can set the input level for each Activates Medium Compression Mode. input selector individually. This is useful if one of your source components is louder or quieter than the others.
  • Page 61 Picture Adjust Name input area Using Picture Adjust, you can adjust the picture quality 4 - 4. Name Edit BD/DVD and reduce any noise appearing on the screen. Name To view the TV picture while setting, press ENTER. To return to the previous screen, press RETURN. –...
  • Page 62 High optimal picture quality from the controller. Accordingly, With Random Noise Reduction, you can remove Onkyo recommends that setup and calibration be indiscriminate picture noise, such as film grain. performed by an ISF Certified installation technician. ■...
  • Page 63 ■ Brightness *1*3*5 Note –50 to 0 to +50 • “Picture Adjust” cannot be used with the NET input selector. With this setting you can adjust the picture brightness. This procedure can also be performed on the remote controller “–50” is the darkest. “+50” is the brightest. by using the Home menu (➔...

  • Page 64: Listening Mode Preset

    Note Note • The setting is stored individually for each input selector. • This setting cannot be selected when: • This setting can be made only for the input source that is – the UP-A1 Dock with docked iPod/iPhone is not connected to assigned as HDMI IN, COAXIAL IN, or OPTICAL IN.

  • Page 65: Miscellaneous

    ■ ■ 2ch Source Power On Volume With this setting, you can specify the listening mode Last, Min, 1 to 99 or Max (Absolute display) used when 2-channel (2/0) stereo digital sources, such Last, – dB, –81dB to +18dB (Relative display) as Dolby Digital or DTS, are played.

  • Page 66: Hardware Setup

    Select if a TV in Zone 2 is connected to the 1, 2, or 3 COMPONENT VIDEO ZONE 2 OUT. When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate Select if no TV in Zone 2 is connected to the the AV controller from the other components, you can COMPONENT VIDEO ZONE 2 OUT.
  • Page 67 HDMI Note • Only the input source assigned to the HDMI IN via “HDMI ■ HDMI Control(RIHD) Input” is enabled (➔ page 49). • The power consumption during standby mode will increase during the HDMI Through function; however in the following cases, the power consumption can be saved: Turn this setting on to allow -compatible...
  • Page 68 ■ Audio Return Channel Network Auto: After modifying the network settings, you must confirm The audio signal from your TV tuner can be sent to the changes by executing “Save”. the HDMI OUT MAIN of the AV controller. The audio return channel (ARC) function allows an ARC This section explains how to configure the AV capable TV to send the audio stream to the HDMI OUT controller’s network settings manually.

  • Page 69: Remote Controller Setup

    With this setting, you can specify whether or not to turn on • Perform the firmware update only when such an announcement your TV. is posted on the Onkyo web site. Visit the Onkyo web site for the ■ latest information.

  • Page 70: Lock Setup

    Tone Control Settings Lock Setup ■ Bass With this preference, you can protect your settings by locking the setup menus. –10dB to 0dB to +10dB in 2 dB steps. You can boost or cut low-frequency sounds output. Main menu Lock Setup ■...
  • Page 71 Dolby Volume Late Night ■ ■ Dolby Volume Late Night page 57). See “Dolby Volume” of “Audio Adjust” (➔ For Dolby Digital and Dolby Digital Plus sources, the options are: Note • This setting cannot be used in either of the following cases: Low: –...
  • Page 72 Re-EQ With the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it more suitable for home theater viewing. ■ Re-EQ This function can be used with the following listening modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Multichannel, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Express, DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby...

  • Page 73: Multi Zone

    Multi Zone In addition to the main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a different source for each room. Zone 2 Video Output Making Multi Zone Connections The AV controller features composite video and Zone 2/3 speakers must be connected to individual component video outputs for connection to a TV in...

  • Page 74: Controlling Zone 2/3 Components

    To select an input source for Zone 2/3, press ZONE Controlling Zone 2/3 Components repeatedly, followed by INPUT SELECTOR. ■ Operating on the AV controller To select AM or FM, press the TUNER input selector and ZONE repeatedly. Input selector buttons Note ZONE 3 MASTER VOLUME...

  • Page 75: Using The 12V Triggers

    Adjusting the Tone and Balance of Zones Using the 12V Triggers The 12V triggers A, B, and C can be used to turn on 12V On the AV controller, press ZONE 2 or ZONE 3. trigger-capable components automatically when they are selected as the input source.

  • Page 76: Using The Remote Controller In Zone And Multiroom Control Kits

    Using a Multiroom Kit with a Cabinet Using the Remote Controller in Zone and Multiroom Control Kits In this setup, the IR receiver picks up the infrared signals from the remote controller and feeds them to the AV To control the AV controller with the remote controller controller located in the cabinet via the connecting block.

  • Page 77: Controlling Other Components

    • Before selecting a different input source, stop your depending on the region. iPod/iPhone playback to prevent the AV controller from For the latest information on the Onkyo Dock selecting the iPod/iPhone input source by mistake. components, see the Onkyo web site at: •...

  • Page 78: Controlling Your Ipod/Iphone

    ■ Status Messages System Off If either of the following messages is not displayed on the When you turn off the AV controller, RI Dock turns off AV controller’s display, check the connection to your automatically. iPod/iPhone. Note • PORT Reading •...
  • Page 79 • For detailed operation of iPod/iPhone, please refer to the instruction manual of the RI Dock. This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Also, your iPod/iPhone may not respond the first time you press this button, in which case you should press it again.

  • Page 80: Controlling Other Components

    “Skip”, and then press ENTER. If you select “Skip”, you will go to step 11. page 82) BD/DVD Onkyo Blu-ray Disc player (➔ page 82) TV/CD Onkyo CD player (➔...

  • Page 81: Entering Remote Control Codes

    When you searched for the model, a message Entering Remote Control Codes “Successful” will appear. Now the transfer is You’ll need to enter a code for each component that you successful! want to control. Go to step 15. When you did NOT search for the model, push any Look up the appropriate remote control code in the key (except for arrow buttons and ENTER) to see separate Remote Control Codes list.

  • Page 82: Remote Control Codes For Onkyo Components Connected Via

    Controlling Onkyo components without component, you can control your component as described If you want to control an Onkyo component by pointing below. the remote controller directly at it, or you want to control For details on entering a remote control code for other an Onkyo component that’s not connected via...
  • Page 83 ✔: Available buttons Press the appropriate REMOTE Components MODE first. Buttons ✔ ✔ ✔ ✔ ✔ SOURCE ✔ , INPUT, TV VOL / ✔ ✔ ✔ GUIDE ✔ TOP MENU ✔ ✔ ✔ ✔ ✔ / / / , ENTER ✔...

  • Page 84: Learning Commands

    • Remote controller buttons such as Play, Stop, and Pause are is pressed in CD remote mode. preprogrammed with commands for controlling Onkyo CD This is useful when you’ve entered the appropriate remote players, cassette decks, and DVD players. However, they can control code (➔...

  • Page 85: Using Normal Macros

    Running Macros Using Normal Macros You can program the remote controller’s ACTIVITIES to Press MY MOVIE, MY TV, or MY MUSIC. perform a sequence of remote control actions. The commands in the macro are transmitted in the Example: order in which they were programmed. Keep the To play a CD you typically need to perform the following remote controller pointed at the AV controller until actions:...

  • Page 86: Appendix

    If you can’t resolve the issue yourself, try resetting the are properly connected, and leave the AV controller AV controller before contacting your Onkyo dealer. with its power cord disconnected for 1 hour. After To reset the AV controller to its factory defaults, turn...
  • Page 87 ■ ■ Only the front speakers produce sound Can’t select the Pure Audio listening mode When the Stereo or Mono listening mode is selected, — The Pure Audio listening mode cannot be selected — only the front speakers and subwoofer produce while Zone 2/3 is on.
  • Page 88 HDMI outputs. If the message “Resolution Error” appears on the — If it’s an Onkyo component, make sure that the AV controller’s display, this indicates that your TV cable and analog audio cable are connected properly. does not support the current video resolution and Connecting only an cable won’t be enough.
  • Page 89 — remote controller. playback by pressing your iPod/iPhone model’s Play button. Remote operation should then be possible. To control an Onkyo component that’s connected Try resetting your iPod/iPhone. — , point the remote controller at the AV controller. Be sure to enter the appropriate remote Depending on your iPod/iPhone, some buttons may —...
  • Page 90 ■ ■ Playback stops while listening to music files on The display doesn’t work the server The display is turned off when the Pure Audio — listening mode is selected. Make sure your server is compatible with the AV 101, controller.
  • Page 91 If the video source is connected to COMPONENT VIDEO IN 1, select the relevant input selector, and Onkyo is not responsible for damages (such as CD assign it to “IN1”. rental fees) due to unsuccessful recordings caused by If the video source is connected to COMPONENT the unit’s malfunction.

  • Page 92: Firmware Update

    Press RECEIVER followed by SETUP on the music files beforehand. remote controller. • If you connect a USB hard disk drive to the USB port, Onkyo The Setup menu will be displayed on the TV screen. recommends that you use its AC adapter to power it.
  • Page 93 USB device, remove it first. are connected with an Ethernet cable. • Make sure your router is configured properly. Download the firmware file from the Onkyo web See the instruction manual of the router. site. The file name is as follows: •...
  • Page 94 China, Hong Kong Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.onkyochina.com/ Asia, Oceania, Middle East, Africa Please contact an Onkyo distributor referring to Onkyo SUPPORT site. http://www.intl.onkyo.com/support/local_support/index.html...

  • Page 95: Connection Tips And Video Signal Path

    Connection Tips and Video Signal Path The AV controller supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN.
  • Page 96 ■ “Monitor Out” set to “Analog” Video Signal Flow Chart Video input signals flow through the AV controller as Blu-ray Disc/DVD player, etc. shown, with composite video, S-Video, and PC IN (Analog RGB) sources being upconverted for the component video output.
  • Page 97 Video Resolution Chart The following tables show how video signals at different resolutions are output by the AV controller. NTSC/PAL ✔: Output Output HDMI Input 1080p/24 1080p 1080i 720p 480p/576p 480i/576i ✔ ✔ ✔ HDMI 1080p ✔ ✔ ✔ ✔ ✔...

  • Page 98: Using An Rihd-Compatible Tv, Player, Or Recorder

    Using an RIHD-compatible TV, Player, or Recorder , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV controller can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard.
  • Page 99 ■ How to connect and setup Confirm the settings. 1. Turn on the power for all connected components. Confirm the connecting and setting. 2. Turn off the power of the TV, and confirm that 1. Connect the HDMI OUT MAIN jack to the the power of the connected components is turned HDMI input jack of the TV.

  • Page 100: About Hdmi

    About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, and multichannel PCM).

  • Page 101: Network/Usb Features

    Network/USB Features Connecting to the Network Network Requirements ■ Ethernet Network The following diagram shows how you can connect the AV controller to your home network. In this example, it’s For the best results, a 100Base-TX switched Ethernet connected to a LAN port on a router, which has a 4-port network is recommended.
  • Page 102 • Protected WMA music files on an MP3 player cannot be played. • Onkyo accepts no responsibility whatsoever for the loss or Minimum system requirements for Windows Media...
  • Page 103 ■ LPCM (Linear PCM) Supported Audio File Formats • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, For server playback and playback from a USB device, the 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, AV controller supports the following music file formats.

  • Page 104: Specifications

    Specifications ■ Amplifier Section HDMI Input IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7, THD+N (Total Harmonic Distortion+Noise) AUX (Front) 0.05% (20 Hz - 20 kHz, half power) Output OUT MAIN, OUT SUB Input Sensitivity and Impedance (Unbalance) Video Resolution 1080p 200 mV/47 kΩ...
  • Page 105 Memo...
  • Page 106 Memo...
  • Page 107 Memo...
  • Page 108 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 Y1107-1 SN 29400805 (C) Copyright 2011 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 0 8 0 5 *...

Table of Contents

Save PDF