Setting A Password - Acer TravelMate B113-M Service Manual

Setting a Password

Perform the following to set the supervisor password:
↑
Use the and
1.
Enter. The Set Supervisor Password dialog box appears.
Type the password in the Enter New Password field.
2.
NOTE:
Passwords are not case sensitive and the length must not exceed 12 characters. The
following characters may be used in a password.
IMPORTANT:
Use care when typing a password. Characters do not appear on the screen.
Retype the password in the Confirm New Password field.
3.
Press Enter. The Setup Notice dialog box appears.
4.
Press Enter to complete the password setting. After setting the supervisor password, the
5.
computer sets the Supervisor Password Is parameter to Set.
Press F10 to save changes and exit BIOS Setup Utility.
6.
System Utilities
↓
keys to highlight the Set Supervisor Password parameter and press
Set Supervisor Password
Enter New Password
Confirm New Password
Figure 2:4. Set Supervisor Password
A - Z Alphabets A through Z (Not Case Sensitive)
0 - 9 Numerical Characters
- Dash
= Equal Sign
[ Left Bracket
] Right Bracket
. Period
, Comma
; Semi-colon
/ Slash
\ Back-slash
Figure 2:5. Setup Notice
[
[
Setup Notice
Changes have been saved.
[Continue]
]
]
2-8