Appendix; Maintenance; Oiling; Changing The Bulb - Brother LS-2125i - Basic Sewing And Mending Machine Operation Manual
Users manual - english
Hide thumbs
Also See for LS-2125i - Basic Sewing And Mending Machine:
- Instruction manual (67 pages) ,
- Instruction manual (72 pages) ,
- Service manual (21 pages)
Table of Contents
Advertisement
4
APPENDIX
MAINTENANCE
Simple sewing machine maintenance operations are described below.
Oiling
a
Turn off the machine and unplug it.
b
Put 2 to 3 drops of oil at each of the points
indicated below.
Be sure to wipe any excess oil off the
machine.
c
After oiling, run the machine for a short time
at a fast speed without thread.
Memo
● Make sure to oil the machine once a week if
you use it more than an hour a day. If you
use it more often, oil every day.
● Sewing machine oil is available at your
local sewing machine dealer or service
center.
● Do not apply too much oil as it may soil the
thread and fabric.
Changing the bulb
CAUTION
● Unplug the power supply cord before
changing the bulb, otherwise injuries or an
electric shock may occur.
a
Turn off the machine and unplug it.
Loosen the face plate screw.
b
c
Remove the face plate from the machine.
Note
● Hold the face plate securely while removing
or attaching it.
4
45
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the LS-2125i - Basic Sewing And Mending Machine and is the answer not in the manual?
Questions and answers