Upgrading Integrity Servers From Windows Server 2008 - HP DL585 - ProLiant - G2 Integration Notes

NOTE
The Configure Now link will not appear when running
Microsoft Windows Server 2008 with the Server Core option.
To configure components to be deployed on this OS
configuration, access the system as a remote host using HP
Smart Update Manager running on a system with a supported
Windows OS and then configure the components before
deployment.
After selecting the components to install, click Install to proceed with the installation. Once the
9.
installation completes, the Installation Results screen appears. If the PSP installs successfully, the
process is complete.
If any components did not install successfully, complete the following steps:
10.
Exit HP Smart Update Manager.
1.
Make corrections to your environment.
2.
Restart the application to install the components that had problems.
3.

Upgrading Integrity Servers from Windows Server 2008

To upgrade Integrity Servers from Windows Server 2008 to Windows Server 2008 SP2, complete the
following, and then reboot the server before installing Windows Server 2008 SP2:
Install update KB955430, which is available at
www.microsoft.com/downloads/details.aspx?FamilyID=8778d46d-158c-42b4-8c17-
7b38d76ef6f6&displaylang=en
Use the latest Integrity Support Pack that is available for your system to update your system to the
latest HP software/drivers.
Download the latest driver (cp010841.exe) for the Neterion 10-Gb NIC, if applicable. The
driver is available at
Download and install the Microsoft Windows Server 2008 SP2 upgrade for IA64 servers.
Install the latest Microsoft updates from the Microsoft Windows Update service.
NOTE
Upgrading from Microsoft Windows Server 2003 for Itanium-Based
Systems to Windows Server 2008 is NOT supported by Microsoft.
Table 8. Integrity Support Pack version for Windows Server 2008 SP2
Integrity server
BL860c
BL870c
Rx2660
Rx3600
Rx6600
Rx7620*
Rx7640
.
.
www.hp.com
Integrity Support Pack version
6.2
6.2
6.2
6.2
6.2
6.1
6.2
20