Managing Volumes - HP StorageWorks 4000s - NAS Administration Manual

Managing Volumes

To manage volumes on the server:
1. On the primary navigation bar, click Disks.
2. Click Volumes.
3. In the Tasks list, click Manage.
The Manage Volumes screen is displayed. The Manage Volumes page displays all volumes on
the NAS device regardless of their format (NTFS, FAT, or FAT32). Do not tamper with the
"Don't Erase" or the Local C: volume. These are reserved volumes and must be maintained as
they exist.
Figure 40: Manage Volumes screen
Table 7: Manage Volumes Options
Delete*
Extend
Rescan
Advanced Volume Management
* This task cannot be completed on a clustered resource.
NAS 4000s and 9000s Administration Guide
Option
Select to delete the selected volume. This is data destructive
and there is no recovery other than from tape.
Opens a page to extend a partition based on a basic disk
or to extend dynamic based volumes.
Select to detect a volume or partition added to the system or
to update the size of a volume that has undergone
expansion. The rescan is not synchronous and may require a
browser refresh after the scan is initiated to display the new
content.
Select to open the Windows Disk Manager and perform
advanced volume management tasks.
Disk Management
Task
79