Installing Hp Remote Console; Minimum Server Requirements - HP D7171A - NetServer - LPr Administrator's Manual

2 Installing HP Remote Console

The HP NetServer's built-in Remote Console feature can be used to provide
troubleshooting and diagnostic services. Remote Console allows you (or a VAR
or system administrator) to manage, monitor and configure a server without
traveling to the NetServer site. Using Remote Console, you can access and
initiate all the configuration and diagnostic features incorporated into the HP
NetServer Utility Partition. The following illustration shows how HP's Remote
Console works.
You (or your customer) may need assistance setting up a NetServer for HP
Remote Console, particularly if you are unfamiliar with DOS prompt computing.
In such cases, HP recommends that you first establish phone contact with an
assistant and walk them through the setup defined in "Setup at the HP NetServer"
of the installation steps that follow.

Minimum Server Requirements

In order to use HP Remote Console, your server needs:
An installed HP Utility Partition
Figure 3: HP Remote Console Setup
5