HP D7171A - NetServer - LPr Upgrade Manual page 24

Hp netserver lh 3/lh 3r to lh 4/lh 4r

Hide thumbs Also See for D7171A - NetServer - LPr:

Table of Contents

Chapter 3

Figure 3-5. Removing the Memory Cards

3. Position the memory board on a static-dissipating work surface and remove

the DIMMs from their packing materials.

4. Remove a DIMM from its container, handling the module by its ends; do

not touch the pins. Lay it on an anti-static surface.

5. Locate the slot in which you will install the DIMM (shown in Figure 3-6).

Spread the two retaining clips outward (see Figure 3-7).

Bank 1

Bank 2

Bank 3

Bank 4

Figure 3-6. DIMM Slot Location

Installing LH 4 Components

Table of Contents