Setting The Processor Speed - HP D7171A - NetServer - LPr Installation Manual

Chapter 7

Setting the Processor Speed

Processor speeds are set from the system switch located on the system
board.
NOTE
Some processor speeds may not be supported. For latest
information, visit the HP website:
http://www.hp.com/go/netserver
Determine the processor speed from the following table, and set the system switch
accordingly.
Table 7-1. System Switch Settings—Processor Speed
Speed Switch 1
550 MHz ON
600 MHz OFF
650 MHz OFF
700 MHz OFF
750 MHz OFF
Figure 7-7. System Switch Location
Switch 2
OFF
ON
ON
ON
ON
Installing Additional Processors
Switch 3 Switch 4
OFF OFF
ON ON
ON OFF
OFF ON
OFF OFF
75