Setup Utility Factory Settings - HP D6030A - NetServer - E50 Installation Manual

Chapter 8
NOTE You may find it helpful to save the Setup Utility (BIOS)
configuration to a diskette after making the Setup Utility
changes. If the CMOS is corrupted later, you will have a
backup available to reload the Setup Utility configuration.
Refer to the instructions on the HP Startup CD-ROM.

Setup Utility Factory Settings

Table 8-2. Setup Utility Factory Settings
Field Name/
Menu Title Submenu
Main Legacy Diskette A
Halt On
Advanced AGP Capability
PCI Configuration
Boot order is changed according to the needs of the customer.
Boot
Removable Device
Other Boot Device
Quick Power On
Self Test
Boot Up
Floppy Seek
Use the Setup Utility's defaults except where noted in this table. Some fields
labeled [Auto] affect subsequent fields, which will be N/A or grayed out.
Configuring the HP NetServer
Factory Set/
Sub-field Factory Set
[1.44M, 3.5]
Default
[All Errors]
Default
[2X Mode]
Default
VGA BIOS [AGP/PCI]
Sequence
[Legacy Floppy]
Default
[SCSI Boot Device]
[Disabled]
Memory checking is required
[Disabled]
57