Sanyo XU88 - PLC XGA LCD Projector Owner's Manual page 61

[1]––––––––––––––––––––––––––––––––––
When PJ lamp is off.
o
When PJ lamp replacement time is reached.
o
When internal PJ power circuit is failed.
o
When internal PJ temperature is too high.
o
[2]––––––––––––––––––––––––––––––––––
When PJ is turned into Standby in proper user
o
operation.
When lamp Corres. Value reaches
o
[ ] hours.
When Power management function turns PJ
o
lamp off.
[3]––––––––––––––––––––––––––––––––––
When the signal is interrupted.
o
When Auto Play is failed.
o
When accumulated filter use time
o
reaches [ ] hours.
✐ Up to 99,999 hours can be set for the time setting.
✐ If condition "When Auto Play is failed" is checked, the trap is sent when the error occurs during the auto dis-
play operation using with the network viewer function (+p.109). For further information of the error, refer to
item "Auto Display setting and control page [3]"((+p.123).
Trap option
Trap option setting
Tick the check boxes in front of the condition item to send the trap.
Set
✐ Click button if you tick or un-tick the check box on a page.
SNMP setting
61