Advanced Performance Monitoring commands
The commands listed in
Monitoring license key.
Table 25
Performance monitoring commands
Command
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
perfCfgClear
perfCfgRestore
perfCfgSave
perfClearEEMonitor
perfClearFilterMonitor
perfClrAlpaCrc
perfDelEEMonitor
perfDelFilterMonitor
perfSetPortEEMask
perfShowAlpaCrc
perfShowEEMonitor
perfShowFilterMonitor
perfShowPortEEMask
770 Licensed product commands
Table 25
are available with the purchase of an HP Advanced Performance
Description
Add an end-to-end monitor to a port.
Add an IP monitor to a port.
Add a SCSI Read monitor to a port.
Add a SCSI Read and Write monitor to a port.
Add a SCSI traffic frame monitor to a port.
Add a user-defined monitor to a port.
Add a SCSI Write monitor to a port.
Clear the performance monitoring settings from flash memory.
Restore performance monitoring settings from flash memory.
Save the current performance monitoring settings to flash memory.
Clear statistics counters of an end-to-end (EE) monitor on a port.
Clear statistics counters of a filter-based monitor.
Clear an AL_PA device CRC count by the port and AL_PA.
Delete an end-to-end monitor on port.
Delete a filter-based monitor.
Set overall mask for end-to-end (EE) monitors.
Display the AL_PA CRC count by port or by AL_PA.
Display user-defined end-to-end monitors on a port.
Display filter-based monitors for a port.
Display the current end-to-end mask of a port.