Setting Up The Projector; Screen Setting - Sanyo WXU30 - PLC - LCD Projector Owner's Manual

Setting up the projector

Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.

Screen setting

This function is to adjust the screen mode of
the projector. The values in the text box rep-
resent the current screen status.
Item Description
Screen ..................... Switches the screen mode. (Normal, True, Full, Wide, Zoom, Natural wide, Custom)
There may not be available mode depending on the input mode as shown in the
table below.
Input source
Screen mode Video Computer
Normal
4
True *
Full
4
Zoom
4
Wide
4
Natural Wide
4
Custom
4
4
4
4
*
✐ The mark "
*
the selected input source system. The error message
*
appears when selecting the disabled screen mode indi-
cated with "*".
4
" means that the available screen mode in
4
Setting up the projector