Displaying And Clearing System Message Logs; Viewing Raslog Messages From Web Tools; Displaying Raslog Messages - Brocade Communications Systems SN3000B Reference

TABLE 3
Command
syslogdFacility
syslogdIpAdd
syslogdIpRemove
syslogdIpShow
traceDump

Displaying and clearing system message logs

This section provides information on viewing and clearing RASLog messages. These procedures are
valid for all the supported platforms.

Viewing RASLog messages from Web Tools

To view the system message log for a switch from Web Tools, perform the following steps.
1. Launch Web Tools.
2. Select the desired switch from the Fabric Tree. The Switch View displays.
3. Click the Switch Events tab. You can view the switch events and messages in the Switch Events
In dual-domain switches, an Event button exists for each logical switch. Only messages relating to
that switch (and chassis) will be displayed.

Displaying RASLog messages

To display the system message log with no page breaks, perform the following steps.
1. Log in to the switch as admin.
2. Enter the errDump command at the command line.
Fabric OS Message Reference
53-1002448-01
Commands for viewing or configuring the system parameters and message logs (Continued)
Description
Changes the syslogd facility.
Adds an IP address as a recipient of system messages.
Removes an IP address as a recipient of system messages.
Views the currently configured IP addresses that are recipients of system messages.
Displays, initiates, or removes a Fabric OS module trace dump.
Report displayed.
switch:admin> errdump
Version: 7.0.1
2000/12/17-05:54:30, [HAM-1004], 1, CHASSIS, INFO, switch, Processor rebooted
- Reset
2000/12/17-05:55:04, [ZONE-1034], 2, FID 128, INFO, switch, A new zone
database file is created.
2000/12/17-05:55:04, [FCR-1069], 3, FID 128, INFO, switch, The FC Routing
service is enabled.
2000/12/17-05:55:04, [FCR-1068], 4, FID 128, INFO, switch, The FC Routing
service is disabled.
2000/12/17-05:55:11, [EM-1034], 5, CHASSIS, ERROR, switch, PS 2 set to faulty,
rc=2000e.
[...]

Displaying and clearing system message logs

1
15