Getting Started
C
Press
5 button to select the item requires adjusting.
D
Press
3 button to adjust the selection item.
E
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Display Mode
❖
To set the picture proportion, press3 button to
select 4:3/Zoom1/Zoom2/Wide/16:9/Auto. You can
quickly select the desired mode by ARC button on
the remote control.
4:3 mode
•
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
16:9 mode
•
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.
Zoom1
•
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Zoom2
•
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.
•
Wide
Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
at top sides and no alteration, at bottom side.
Blue Screen
❖
This will select the character background colour.
EN-19 Digital LCD Television Instruction Manual
Note
The Blue Screen function is only available for
❏
ATV mode.
Recorder
❖
To recorder the DTV program. Details of Recorder are
described in the page of 25, 26.
SCART Input
❖
When you use the SCART2 input ,make sure the input
source is AV or S-VIDEO, and set the SCART INPUT
option.
OSD Time Out
❖
To set how long you want the menus to appear
on-screen. Each press of 3 button repeatedly to
select the number of preset minutes, the Time will be
set in sequence: off, 10sec, 15sec, 30sec, 45sec, 60sec.
OSD Transparency
❖
To set the transparency background of OSD, the
transparency will be set in sequence: Off, 25%, 50%,
75%, 100%.
Reset
❖
To recover to the default value.
TIME SETTINGS
Clock
❖
A
MENU button.
Press
B
Press
3 button to select Time menu, press
button to enter.