Registering A Digital Certificate To The Projector; Digital Certificates That Can Be Registered; Registering A Client Certificate - Epson PowerLite Pro G5650W Operation Manual

Other functions

Registering a Digital Certificate to the Projector

When Security is set to EAP-TLS from the projector's Network menu,
you need to register the client certificate and the CA certificate in the
projector for authentication.
This section describes the method for using PC Free to register a digital
certificate that has been saved in a USB storage device, to the projector.

Digital certificates that can be registered

Only one set of client certificate and CA certificate can be registered in
the projector. If another digital certificate is registered, it overwrites the
previous certificate.
Type Exten
sion
Client certificate .pfx Certificates without passwords (NULL) cannot
be used.
CA certificate .cer Certificates encoded in binary format (DER).
Certificates encoded in base64 cannot be used.

Registering a Client Certificate

Procedure
A
Connect the USB storage device on which the digital
certificate is stored to the projector and start PC Free. s
The file list screen is displayed.
Notes
p.7
B
Press the [h] button on the remote control or [w/
[v/ ], [</ ] and [>/ ] buttons on the control panel to
position the cursor over the client certificate (PFX file) icon,
and then press the Esc button.
C
Select "Digital certificate" from the menu displayed, then
press the Enter button. The following screen is displayed.
D
Enter the password using the soft keyboard. (you can enter
up to 32 single-byte alphanumeric characters)
20
],