Change Supervisor Password - Asus P6T7 WS SuperComputer - Motherboard - SSI CEB User Manual

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a Supervisor Password:
Select the Change Supervisor Password item and press <Enter>.
1.
2. From the password box, type a password composed of at least six letters
and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message "Password Installed" appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a user
password.
To clear the supervisor password, select the Change Supervisor Password then
press <Enter>. The message "Password Uninstalled" appears.
If you forget your BIOS password, you can clear it by erasing the CMOS Real
Time Clock (RTC) RAM. Refer to section 2.6 Jumpers for information on how to
erase the RTC RAM.
After you have set a supervisor password, the other items appear to allow you to
change other security settings.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
[No Access] prevents user access to the Setup utility.
[View Only] allows access but does not allow change to any field.
[Limited] allows changes only to selected fields, such as Date and Time.
[Full Access] allows viewing and changing all the fields in the Setup utility.
3-34
BIOS SETUP UTILITY
: Installed
: Installed
[Full Access]
[Setup]
Boot
<Enter> to change
password.
<Enter> again to
disabled password.
Chapter 3: BIOS setup