Table of Contents
Advertisement
Note: If the onboard WiMAX modem is not first activated prior to initiating the
PAM feature, you will receive an error message on the External
Connection page once you attempt to initiate a Mobile WiMAX
connection (page 110).
Set the External Connections menu to enable Mobile WiMAX
2.
communication via the USB:
• From the Today screen, touch Start (
• Tap the Connection tab and touch External Connection > Mobile
WiMAX.
ok
• Touch
to save the new connection type and activate the
Samsung USB mWiMAX Adapter driver.
109
) > Settings.
Connect one end of the USB data cable (included with your
3.
device) into the USB port on your computer.
Connect the other end into the Power/USB Data jack on the
4.
left side of the device.
• If you are unable to recognize the device in PAM mode, you can
confirm the correct Network adapter is being used:
– From your computer, click Start > Control Panel > System >
Hardware tab (1).
Note: Another navigation route is to right-click on your My Computer icon and
click Properties > Hardware tab.
• Click Device Manager and open the Network adapters area (2) to
confirm the proper driver installation.
Advertisement
Table of Contents
