Supermicro Supero X8DTU-F User Manual page 72

X8DTU/X8DTU-F User's Manual
BIOS EHCI Hand-Off
Select Enabled to support BIOS Enhanced Host Controller Interface to provide a
workaround solution for an operating system that does not have EHCI Hand-Off sup-
port. When enabled, the EHCI Interface will be changed from the BIOS-controlled
to the OS-controlled. The options are Disabled and Enabled.
IDE/SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE or Floppy devices and displays the following items:
SATA#1 Configuration
If Compatible is selected, SATA#1 will be set to a legacy compatibility mode. Select
Enhanced to set SATA#1 to the native SATA mode. The options are Disabled,
Compatible and Enhanced.
Configure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are
IDE, RAID and AHCI. (When the option-RAID is selected, the item-ICH RAID
Code Base will appear. When the option-AHCI is selected, the item-SATA AHCI
will be available.)
ICH RAID Code Base (Available when the option-RAID is selected)
Select Intel to enable Intel's SATA RAID firmware to configure Intel's SATA RAID
settings. Select Adaptec to enable Adaptec SATA RAID firmware to configure
Adaptec SATA RAID settings. The options are Intel and Adaptec.
SATA AHCI (Available when the option-AHCI is selected.)
Select Enable to enable the function of Serial ATA Advanced Host Interface.
(Take caution when using this function. This feature is for advanced program-
mers only.)
SATA#2 Configuration (Available when the option-IDE is selected)
Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled,
and Enhanced.
IDE Detect Timeout (sec)
Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI
devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and
35.
4-12