Error displays/Messages
CHECKING
The unit is confirming the connection of a USB device.
-
Wait until confirming the connection is finished.
ERROR*l
o
The disc is dirty or inserted upside down.
*2
-
Clean or insert the disc correctly.
o
A blank disc has been inserted.
o
The disc cannot play due to a problem.
-
Insert another disc.
o
USB device was not automatically recognized.
-
Reconnect it again.
o
Press
~
to remove the disc.
FAILURE (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
-
See the installation/connections manual of this
model to check the connection.
FAILURE (Illuminates for about I second.)
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
-
Be sure to receive the channel that you want to
store, then try it again.
LOAD
The CD changer is loading the disc.
-
Wait until loading is complete.
L.
SEEK +/-
The local seek mode is on during automatic tuning.
NO DEV (No Device)
(SOURCE)
is selected without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
-
Be sure to connect a USB device and USB cable.
NO DISC
The disc is not inserted in the CD changer.
-
Insert discs in the CD changer.
NO MAG
The disc magazine is not inserted in the CD changer.
-
Insert the magazine in the CD changer.
NO MUSIC
The disc or USB device does not contain a music file.
-Insert a music CD in this unit or an MP3 playable
CD changer.
-Connect a USB device with a music file in it.
NO NAME
A disc/album/artistltrack name is not written in the
track.
NO SUPRT (Not Support)
o
USB hub is not supported on this unit.
o
The connected USB device is not supported.
-
For details on the compatibility of your USB
device, visit the support site.
OFFSET
There may be an internal malfunction.
-Check the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
OVERLOAD
USB device is overloaded.
-
Disconnect the USB device, then change the source
by pressing
(SOURCE).
-
Indicates that the USB device is out of order, or an
unsupported device is connected.
READ
The unit is reading all track and album information on
the disc.
-
Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
RESET
The CD unit. CD changer or USB device cannot be
operated due to a problem.
-
Press the RESET button (page 6).
"L L L L"
or "-, -, -, -, "
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
The character cannot be displayed with the unit.
*
I If
an error occurs during playback of
a
CD, the disc
number of the CO does not appear in the display
*2 The disc number of the disc causing the error
appears in the display
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
_
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.
25