Caution Congratulations on your purchase of a high-quality We recommend that most appliances be placed Insignia product. Your NS-R2001 represents the upon a dedicated circuit—a single outlet circuit which powers only that appliance and has no state of the art in stereo receiver design and is additional outlets or branch circuits.
Page 4
NS-R2001 Insignia NS-R2001 AM/FM Stereo Receiver 12 Use only with the cart, stand, 15 To reduce the risk of fire or electric shock, do not tripod, bracket, or table specified expose this device to rain, moisture, dripping, or by the manufacturer, or sold with splashing, and no objects filled with liquids, the apparatus.
NS-R2001 Insignia NS-R2001 AM/FM Stereo Receiver Remote control Package contents • Receiver • Remote control • AAA batteries (2) • Indoor AM antenna • Indoor FM antenna • User Guide • Quick Setup Guide Setting up your receiver Finding a location for your receiver •...
Insignia NS-R2001 AM/FM Stereo Receiver Connecting devices Connecting a turntable Warning Do not plug the AC cord into the AC outlet until all connections are completed. Turntable with MM-type Notes cartridge Be sure to observe the color coding when connecting audio and speaker cords.
NS-R2001 Insignia NS-R2001 AM/FM Stereo Receiver Connecting headphones Using the remote control Use the remote control by pointing it towards the receiver’s remote sensor window. Objects between the remote control and sensor window may prevent proper operation. 23" (7m) To connect your headphones: •...
Insignia NS-R2001 AM/FM Stereo Receiver Using your receiver 3 To listen to the speakers, press the SPEAKER A or SPEAKER B button on the remote control or the SPEAKER A/B button on the receiver to turn the corresponding speakers on. SPK A, SPK B, or...
NS-R2001 Insignia NS-R2001 AM/FM Stereo Receiver 5 Turn the MASTER VOLUME dial or press the Adjusting the tone VOLUME buttons to adjust the sound Adjusting the tone lets you increase or decrease the level. bass and/or treble tones of the music you are listening to.
Insignia NS-R2001 AM/FM Stereo Receiver Adjusting the sound volume balance Listening to the radio Auto tuning To adjust the sound volume balance: 1 Press Balance. “BAL” and the balance level are To auto tune a radio station: displayed for three seconds.
Page 12
NS-R2001 Insignia NS-R2001 AM/FM Stereo Receiver 3 Rotate the UP/DOWN knob quickly (over 2 Press TUNE/PRESET to select the tuning mode. several steps once) or press hold the TUNE buttons for more than 0.5 seconds. Note Each time this button is pressed, the mode changes as follows: •...
Page 13
Insignia NS-R2001 AM/FM Stereo Receiver 2 To stop automatically presetting stations, press 4 Repeat this procedure to memorize additional MEMORY again. stations. Tuning to preset stations Notes • Weak FM stations cannot be memorized To tune to a preset station: •...
NS-R2001 Insignia NS-R2001 AM/FM Stereo Receiver Scanning preset stations in sequence Note If an FM stereo broadcast is poor, due to a weak To scan preset stations: broadcast signal, select the FM mono mode to 1 Press the PRESETS button on the remote reduce the noise.
Insignia NS-R2001 AM/FM Stereo Receiver Using the sleep timer Adjusting the display brightness The sleep timer automatically turns the receiver off To adjust the display brightness: after a specified period of time. • Press the DIMMER button to specify the brightness of the display.
If the problem persists, attempt to solve it by each component for switching the receiver off and on again. If this fails playback and to resolve the problem, contact Insignia. Under no recording. circumstances should you attempt to repair the Remote control receiver yourself as this could void the warranty.
Insignia NS-R2001 AM/FM Stereo Receiver Legal notices FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the FCC Part 15 user’s authority to operate this equipment. Canada ICES-003 statement This device complies with Part 15 of the FCC Rules.
Need help?
Do you have a question about the NS-R2001 and is the answer not in the manual?
Questions and answers