HP D5970A - NetServer - LCII Installation And Configuration Manual page 17

Figure 1-9. Connecting Ultra/Fast Narrow Devices
2. Plug the other end of the cable to a terminated Ultra/Fast Narrow SCSI
device.
3. If you have other Ultra/Fast Narrow SCSI devices, attach them to the
connectors between the two ends of the cable. Be sure these other devices
are unterminated.
4. Connect a power cable from your HP Netserver's internal power supply to
each internal device.
Connecting External SCSI Devices
Connect external Ultra2 and Ultra3 SCSI devices to the 68-pin external LVD/
SE SCSI connector. Each external device will require a high density 68-pin
external LVD SCSI cable.
50-pin SE Narrow SCSI cable
11