Capture A Thin Client Full Image To A Usb Drive - HP vc4825T - Thin Client Administrator's Manual
Hp thinpro administrator's guide (hp vc4825t thin client)
Hide thumbs
Also See for vc4825T - Thin Client:
- Disassembly instructions (4 pages) ,
- Troubleshooting manual (78 pages) ,
- Hardware reference manual (48 pages)
Table of Contents
Advertisement
After image setting settings have been deployed successfully, you may remove the USB flash drive.
8.
Click OK on the information message.
The thin client immediately reboots deploying settings.
NOTE:
key. Simply remove the flash drive and press any key to continue reboot.
Capture a Thin Client Full Image to a USB Drive
To use HP ThinState to capture a thin client full image to a USB drive:
1.
Attach a USB flash drive to the thin client.
NOTE:
makes the flash drive bootable.
2.
Go to Control Panel > ThinState.
3.
Click OK on the notification message. The following window is displayed:
96
Chapter 2 Installation
If you do not remove the USB flash drive, during reboot, you are prompted to press any
HP ThinState, when capturing a full image, automatically formats the USB flash drive and
ENWW
Advertisement
Table of Contents
Need help?
Do you have a question about the vc4825T - Thin Client and is the answer not in the manual?