Thin State; Thin State Capture - HP T5725 - Compaq Thin Client Administrator's Manual

Administrator's guide: linux-based hp compaq t5725 thin clients

Hide thumbs Also See for T5725 - Compaq Thin Client:

Table of Contents

Thin State

Thin State capture and deploy allows you to capture a thin client image and deploy it to other thin clients

of the same model.

The HP ThinState Capture tool is a simple wizard-based tool that can be used to capture an HP thin client

image that can then be deployed to another HP thin client of identical model and hardware.

What do you need to have?

An HP thin client Linux unit that contains the latest HP provided image.

●

An HP-approved USB drive key.

●

NOTE:

administrator from within the thin client image.

NOTE:

procedure. The USB flash drive will be formatted and all data will be lost.

Once you launch the ThinState Capture tool from within the Control Panel, you are presented with

the following screen.

Chapter 2 Control Panel Settings

The HP ThinState Capture tool is not a standalone tool and can only be accessed by the

Save all data on the USB flash drive on some other device prior to performing this

ENWW

Table of Contents

Do you have a question about the T5725 - Compaq Thin Client and is the answer not in the manual?