Using A Fingerprint Reader - Lenovo ThinkPad L430 User Manual

5. Using the cursor keys, move to Security. The Security menu opens.
6. Using the cursor keys, move to Security Chip, and press Enter. The Security Chip submenu opens.
7. Using the cursor keys, move to an item you want to set. When the item is highlighted, press Enter.
8. Set other items that you want to set.
9. Press F10 to save changes and exit.
10. Press Enter in the Setup Confirmation window to confirm the exit.
To set the security chip, you have to start Client Security Solution, and follow the instructions on the screen.
Note: To configure the security chip, you need to download the latest version of Client Security Solution
from the Lenovo Web site. To download Client Security Solution, go to http://www.lenovo.com/support.
Then follow the instructions on the screen.

Using a fingerprint reader

Depending on the options you ordered, your computer may have an integrated fingerprint reader. By
enrolling your fingerprint and associating it with a windows password, you can log on to the system by
swiping your finger over the reader, without typing a password. Thus fingerprint authentication can replace
passwords and enable simple and secure user access.
Enrolling your fingerprint
To use the integrated fingerprint reader, begin by enrolling your fingerprint as follows.
1. Turn on your computer.
2. Start ThinkVantage Fingerprint software, refer to "Accessing ThinkVantage applications" on page 14.
3. Follow the instructions on the screen to enroll your fingerprint. For details, refer to the help information
system of the program.
Swiping your finger over the reader
To swipe your finger over the reader, do the following:
1. Place the ball of your finger, that is, the central part of the fingerprint, on the small circle above the
reader. Ensure that the entire top joint of the finger is on the reader.
54
User Guide