Install The Hp Sam Registration Service - HP BladeSystem bc2000 - Blade PC Administrator's Manual
Administrator's guide hp session allocation manager (hp sam) v.3.0
Hide thumbs
Also See for BladeSystem bc2000 - Blade PC:
- Reference manual (434 pages) ,
- User manual (216 pages) ,
- Setup and installation manual (104 pages)
Table of Contents
Advertisement
Install the HP SAM Registration Service
●
Log in to the blade PC using an account with local administrative rights, and then run the
bladeservice_xx##.MSI file (## is the software version). Replace xx with
◦
◦
◦
◦
◦
◦
●
For Red Hat Linux, extract the HP SAM Linux Registration Service tar.gz package onto the system
by executing this command: tar xzvf <name of file.tar.gz>.
Next, run ./install.sh to install the package.
●
If necessary, stop the service by going to Control Panel > Administrative Tools > Services, and
look for HP SAM Registration Service. If it is running, stop it. For Linux, enter the following command
in the terminal: /etc/init.d/daesvc stop.
●
Customize the service .CFG file. Edit the hpevent.cfg-sample file. For details about how to
customize this file, see
●
After you customize the configuration file (required—see
Configuration File on page
●
Start the HP SAM registration service by going to Control Panel > Administrative Tools >
Services, and start the service under the name HP SAM Registration Service. For Linux, enter the
following command in the terminal: /etc/init.d/daesvc start.
●
If the computing resource has a firewall, enable the ports below.
◦
◦
NOTE:
Another way to enable the port is to enable the software service itself. Follow the firewall
instructions to enable the HP SAM Registration Service software.
30
Chapter 3 Installation
EN = English
JA = Japanese
FR = French
DE = German
KO = Korean
ZH-CN = Simplified Chinese
Create the HP SAM Registration Service Configuration File on page
31), rename (or Save As) the sample file to hpevent.cfg.
Incoming:
- From Web server (UDP/47777) to blade (UDP/47777)
- From Web server (TCP/ANY) to blade (TCP/139)
- From access devices (TCP/ANY) to blade (TCP/3389)—RDP
- From access devices (TCP/ANY) to blade (TCP/42966)—RGS
NOTE:
The default RGS port is TCP/42966; however, RGS 5.3 and later allows this to be
changed. Please see the RGS documentation for details.
Outgoing:
- From blade (TCP/ANY) to Web server (TCP/80—HTTP)
- From blade (UDP/47777) to Web server (UDP/47777)
Create the HP SAM Registration Service
31.
ENWW
Advertisement
Table of Contents
