Updating Software - Hitachi GR2000 Series Installation Manual

Routing Software 06-02 (OS3) Installation Guide
automatic restart. If the connection is broken, the ppupdate command does not
terminate to fail in updating, and restoration of the GR2000 may be disabled.
10. If a message "
ppupdate command, follow the instructions below:
Transfer the update file again to the user's home directory, then execute
command cmp ~/UPDATE.tgz /primaryMC/usr/var/update/UPDATE.tgz to compare
files.
If the command completes without displaying any messages, execute the
ppupdate command again.
If some error messages are displayed before the cmp command completes,
execute cp ~/UPDATE.tgz /primaryMC/usr/var/update/UPDATE.tgz and then execute
the ppupdate command again.
2

Updating Software

The update procedure varies with the configuration of the GR2000 in current use.
Use the files listed in Table 2-1 to update the software. In addition, check the
configuration of the RM and MC card, and then update software by a procedure
suitable for the configuration in Table 2-2.
Table 2-1
No. Directory in CD-ROM
1 All
Table 2-2
No. Device Configuration
1 One RM in the router and two MCs in use
2 One RM in the router and one MC in use
3 Two RMs in the router and two MCs in use for each RM
4 Two RMs in the router and one MC in use for each RM
Table 2-3 shows versions which can be updated from and free MC space required for
updating. Note tha t 1K is equal to 1024 bytes.
Table 2-3
No. Earlier Version
1 03-00-F
2 03-03-/A
3 03-03-/D
4 04-01
5 04-01-/D
2
Files Required for Updating
File Name
BA62.tgz
Device Configuration, Version of Routing Software, and Update Procedure
Free MC Space Required for Updating
MC Capacity
8562K Bytes
6649K Bytes
6640K Bytes
5552K Bytes
5477K Bytes
" is displayed while executing
Update Procedure
Update procedure 1
Update procedure 2
Update procedure 3
Update procedure 4
Updating Boot ROM
Executed
Executed
Executed
Executed
None
S-9181-31X