Diagnostics
Access Connections provides a set of tools to check status of a network connection
and solve any problems found. Click Tools on the main toolbar, and select
Diagnostics from the pull-down menu. The Diagnostic Tools window is displayed.
Figure 44. Diagnostic Tools
Click one of the following tabs to check the status of a connection and the network
settings:
v Connection status
v Ping
v Trace Route
v IP Configuration
The Event Log tab is provided for use in solving problems with network
connections, and can be used by a support center to investigate the causes.
To display the Diagnostic Tools panel from the main Access Connections panel,
click Properties. You can also reach that panel from the window that appears when
the connection to a network fails. To save the data, press Save as on the
Chapter 2. Using location profiles
53