Canon DW-100 User Manual page 20

For Users of the Canon HD Camcorder HG10
Thank you for purchasing the OW-100 OVO Burner. In order to connect the OVO Burner to your camcorder
and create discs, you will need to perform a one-time update of the camcorder's firmware.
In this guide you will find step-by-step instructions how to update the system (rn 2) and how to create and
play back discs using the OVO Burner (rn 4).
1
Updating the HG10's Firmware
Updating your camcorder's firmware is very simple and consists of two parts. First, you will transfer
the updated firmware to the camcorder and then you will update the firmware on the camcorder
itself. The whole procedure can be completed within about 5 minutes.
2
Transferring the New Firmware to the HG10
In this step you will transfer the new firmware
included in the supplied CD-ROM HG10
System Update Disc to your camcorder.
During the update procedure the disc tray
of the DW-100 DVD Burner may open
automatically; do not push it close. Closing
the disc tray may result in the procedure not
being completed correctly or in a
malfunction of the DVD Burner. If you
placed the DVD Burner in a closed cabinet,
leave the cabinet's door open so the disc
tray can open unobstructed.
On the DW-l00 DVD Burner
1
Press the POWER/MODE button to turn
on the DVD Burner.
2
Press the OPEN/CLOSE button.
The disc tray will open.
3
Place the HG10 System Update Disc
CD-ROM on the disc tray but leave the
disc tray open.
On the HG10 HD Camcorder
4
Power the camcorder using the compact
power adapter.
5
Move the
I~
/0 switch to
.~
(Movies).
6
Turn the Imlml switch to ON, then turn it
toward MODE and release it, to set the
camcorder in PLAY mode.
The green PLAY indicator will turn on.
7
Connect the camcorder to the DVD Burner
using the supplied USB cable.
On the DW-l00 DVD Burner
8
Press the OPEN/CLOSE button while
holding pressed down the red start button
(e).
• The disc tray will close automatically and
the REC, PLAY and start indicators will
flash as the new firmware is transferred to
the camcorder.
• After a short while the REC indicator will
stay on, the PLAY and start indicators will
go off and the disc tray will open and close
automatically.
• Do not touch the camcorder or the DVD
Burner and do not perform any other
operation while the transfer is in progress.
• Do not close the disc tray when it opens
automatically.
9
After the index screen is displayed on the
camcorder, make sure that the DVD
Burner is off.
• The firmware's transfer is completed when
the DVD Burner turns off automatically.
• Disconnect the USB cable and remove the
CD-ROM from the DVD Burner.