Correcting Red-Eye Manually
You can manually correct red-eye that cannot be corrected automatically.
1
Display the [Red Eye Correction] window
2
Enlarge the image
(p.33)
Mode].
3
Check that [
] is selected in step 2 and set the
amount of correction.
.
(p.38)
and then select [Manual
Drag to the left or right to adjust
4
Drag and place a box around the place in the image
you want to correct and then click [OK].
Click [OK]
Drag the place to correct
The image is corrected.
5
Correct other places in the same way.
6
Click the [OK] button and save as a separate image
.
(p.34)
Introduction
Table of
Contents
1
Basic
Operation
2
Advanced
Operation
3
High-Level
Functions
4
Preferences
5
Using the
Internet
Reference
Contents
Lookup
Index
39