Keyboard Stand Assembly - Yamaha Arius YDP-V240 Owner's Manual

Keyboard Stand Assembly

CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the
sequence given below.
• Assembly should be carried out by at least two persons.
• Assemble the stand on a hard and flat floor with ample space.
• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Do not use any other
screws. Use of incorrect screws can cause damage or malfunction of the product.
• Be sure to tighten up all screws upon completing assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
Have a Phillips-head (+) screwdriver ready
Remove all parts from the package and make sure you have all of the items.
Foamed styrol pads
Bundled pedal cord inside
D
114
Owner's Manual
A
B
C
E
6 x 20 mm long screws (x 4)
6 x 16 mm short screws (x 4)
4 x 12 mm thin screws (x 2)
4 x 20 mm tapping screws (x 4)
4 x 10 mm thin screws (x 2)
AC power cord (x 1)
Headphone hanger (x 1)
Cord holders (x 2)
Adjuster (x 1)