Disconnecting The Cable - Yamaha mLAN Owner's Manual

Disconnecting the Cable

To disconnect the cable, you can either (a) delete it from the pop-up menu, or (b) use the <Delete> key
on the computer keyboard.
■ Deleting the cable from the pop-up menu
1. Right-click the cable you wish to disconnect (on a Macintosh, click the cable while
holding down the <Ctrl> key).
The selected cable is now represented by a dotted line, and a pop-up menu appears. The numbers in
the pop-up menu indicate the connector numbers to which virtual cables are connected.
2. In the pop-up menu, click the number of the connector you wish to disconnect.
The cable connecting to the connector will be disconnected. Selecting [All] will disconnect all
connectors indicated in the pop-up menu.
■ Using the <Delete> key on the computer keyboard
1. Click the cable you wish to disconnect.
The selected cable is now represented by a dotted line.
2. Press the <Delete> key on the computer keyboard.
mLAN Graphic Patchbay displays a confirmation message.
3. Click [Yes].
4. The selected cable is disconnected.
If multiple connector connection is represented by a single cable (such as group
NOTE
connection), this procedure will disconnect all connector connections.
31